Specifications

SPEEDDOME ULTRA VII CAMERA DOME INSTALLATION AND SERVICE GUIDE (8200-0184-01, REV. A1)
33 of 41
Updating/Reprogramming
Dome Software
CAUTION: This procedure involves extracting a
flash memory chip, an electrostatic-sensitive
device. Use a ground strap when handling the chip.
To update or reprogram dome software:
1. Insert the chip extractor tool into the square
access hole and squeeze the tool to extract the
flash memory chip (Figure 36).
2. Reprogram the chip or replace it with a new
one.
3. Align the dot on the chip with the indent on the
socket, then push down on the chip to reinsert
it.
Figure 36. Removing the flash memory chip