Specifications

SPEEDDOME ULTRA VII CAMERA DOME INSTALLATION AND SERVICE GUIDE (8200-0184-01, REV. A1)
4 of 41
Indoor Ceiling/
Wall Mounting (Optional)
The camera dome attaches to one of the following
optional indoor mounting structures (Figure 5).
Sheet Rock, Plaster or Wood Ceilings
RHIUTH Top hat housing with trim ring
This housing attaches to a ceiling or
to most indoor mounting structures. A
bubble and trim ring provide
concealment. Optional bubbles:
RUCLR (clear), RUSLV (silver),
RUSMK (smoked), or RUGLD (gold).
Plenum adapter RHPLA may be
required to meet local fire codes.
RHIUHC Hard ceiling bracket
Enables top hat housing to be
recessed in ceiling (requires top hat
RHIUTH).
RHIUFB* Fixed bracket
Enables top hat housing to be
recessed in ceiling (requires top hat
RHIUTH).
RHIUPNDT† Pendant mount
Suspends dome from a hard ceiling.
Electrical Box in Ceiling
RHIU3X3† 3 X 3 mounting plate
Attaches dome to a standard
3.5 x 3.5 duplex electrical box.
CAUTION: Do not use the same
electrical box used for line voltage
mains.
RHIU4X4† 4 X 4 mounting plate
Attaches dome to a standard
4 x 4 duplex electrical box.
CAUTION: Do not use the same
electrical box used for line voltage
mains.
Structural I-Beams
RHIUIB† I-beam mount
Enables dome to suspend from an
I-beam.
Tile Ceilings
RHIUFB Fixed bracket
Enables top hat housing to be
recessed in a 2x2 tile (requires
top hat RHIUTH).
RHIUAB Adjustable bracket
Enables top hat housing to be
recessed in a 2x4 tile (requires
top hat RHIUTH).
RHIU2X2* 2 X 2 tile mount
Enables top hat housing to be
recessed in 2x2 openings
(incorporates top hat housing).
RHIU2X2P* 2 X 2 tile pendant mount
Enables dome to be suspended
from 2x2 openings.
Wall Mounting
RHIUWM* Wall mount
Attaches dome to a flat vertical
surface.
RHIUCM* Wall mount with corner feature
Attaches dome to attach to a wall,
inside corner, or outside corner.
RHIULWM*† Long 0.6m (24") wall mount
Positions dome away from wall to
enable it to see over furniture,
shelving, and displays. This mounting
structure attaches to the wall, inside
corner, or outside corner.
* Option in white, but can be painted to match decor.
† Top hat housing/dome assembly also mounts to structure.