User guide

Version 4.0 36

certified professional to install a flue gas pellet venting system. Do not deviate from the pellet

flue manufacturer’s installation instructions. Contact Country Flame or a local authorized dealer

to resolve any questions or installation procedures. TABLE 4 shows the required components

needed for a typical pellet flue pipe mobile home installation. Contact Dura-Vent or other

authorized flue pipe dealers for the latest specifications and costs for mobile home pellet stove

flue pipe parts or for a mobile home flue pipe kit from an authorized chimney dealer.

TABLE 4: MOBILE HOME (minimum) CHIMNEY SYSTEM REQUIRED PARTS

PART NUMBER DESCRIPTION QTY

3180 VERTICAL CHIMNEY CAP 1

3149 0/12 – 6/12 ADJUSTABLE ROOF FLASHING 1

3151 (ALTERNATE) ROOF FLASHING, Flat (versus 3149) 1

3142 CEILING SUPPORT BOX, Fire Stop Spacer 1

3141 (ALTERNATE) CATHEDRAL CEILING SUPPORT BOX, (versus 3142) 1

3160B 5 FOOT CHIMNEY SECTION 2

3179 STOVE PIPE ADAPTER (if needed) 1

CERAFORM 126 WALL PROTECTION ( IF REQUIRED) 1

3145B 45

ELBOW (if needed) 1

3159 STORM COLLAR 1

NOTE: The information provided in TABLE 4 and detailed in FIGURE 15 are for informational

purposes. These corn flue pipe system parts may or may not be needed depending on site specific

conditions found in the specific mobile home application. Consult a certified professional and insure that

any installation meets all federal, state, and local building codes. Failure to follow the flue pipe

manufacturer’s installation instructions will void Country Flame’s product warranty and can have an

adverse impact on the homeowner’s insurance policy. Contact Country Flame or one of its local

authorized dealers to resolve any questions about installation or parts usage.