Installation Instructions

Downloading the App
Scan the following QR code, download and install the App.
Charging and Active
Charging the device to active before the first time using;
To charge your device, plug the charging cable into the
adapter or USB port on your computer.
1.Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and
changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation
splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Watch. We also don't
recommend showering with your wristband; though the water
won't hurt the device, wearing it 24/7 does not give your skin a
chance to breathe. Whenever you get your bracelet wet, dry it
thoroughly before putting it back on.
2.Using the Touch Button
Single tap the Touching Area under the main screen to wake up
the device and switch to other functional pages.
Long press the Touching Area to enter for more functions which
is needed.
3.Using Quick View
With Quick View you can check the time or the message form
your phone on your Smart Watch without taping. Just turn your
wrist towards you and the time screen will appear for a few
seconds.
Smart Watch FeaturesPairing
Long press thetime pageon your device, go to the detail
page. The MAC address on the detail page could help you
identify your device on the scanning list.
Scan QR Code and Download
Go to theDevice, ClickAdd a Device
Choose your device on the scanning list
Finish
Smart Watch Features Smart Watch Features Smart Watch Features Smart Watch Features Smart Watch Features Smart Watch Features Getting to Know Your Device
1.Environmental Conditions
Operating temperature: 14 to 122 (-10 to 50)
Non-operating temperature: -4 to 140 (-20 to 60)
2.Size
Fits a wrist between 5.5 and 7.7 inches in circumference.
3.Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility
to properly dispose and recycle Smart Watch and accompanying
components. Do not dispose of Smart Watch with common
household waste, the Smart Watch unit is considered electronic
waste and should be disposed of at your local electronic
equipment collection facility.
For more information, please contact your local electronic
equipment waste management authority or the retailer where
you bought the product.
Sports
Smart Watch automatically tracks
Steps taken, Calories burned,
Distance traveled and displays on
the screen.
NOTE: Your movement stats reset
to zero at midnight.
Sleep
If you keep wearing Smart Watch in
your sleep , it can provide the hours
slept and quality of sleep stats on
both the screen and the APP.
NOTE: Sleep stats reset to zero at
8:00 pm.
Heart Rate Test
Tap to the heart rate page to
start measuring your heart rate.
On the heart rate page, It can show
the heart rate measured data of the
last-7-times.
Training
Tap to the training page to start
a new train ing meas ure
recording, there are 8 sport modes
to be chosen.
The last training recording will be
shown on the training page.
Blood Pressure Test
Tap to the blood pressure
page to start measuring your blood
pressure.
On the blood pressure page, It can
show the blood pressure measured
data of the last-7-times.
SpO2 Test
Tap to the SpO2 page to start
measuring your SpO2.
On the SpO2 page, It can show the
SpO2 measured data of the last-7-
times.
Weather
It could show the weather info of
current and tomorrow on the weather
page.
Weather info is synced after connecting
with the APP, it will not be updated
after a long disconneted.
Messages Reminder
The device can sync incom ing
notifications from Twitter, Facebook,
Whatsapp, Instagram etc.
Recently 3 messages can be stored.
Note: You can switch of/off the
incoming notification in the APP.
Remote Shutter
After connecting the device can
remote contral the camera on your
phone.
Music Play Contraller
After connecting the device can
remote contral the music player on
your phone.
Other Features
Other features include stopwatch,
brightness adjustment, mute mode,
factory reset, and power off.
Stop Watch
Tap to on the stopwatch page
to start timing, and long press again
to stop timing.
Silent Alarms
Set up the alarm on the APP, the
device will vibrate to remind on
time.
Remind to Move
The device will vibrate to remind you
to make a relax after 1 hour sittiing.
Note: You can switch on/off the
feature in the APP.

Summary of content (1 pages)