Instruction Manual Series 46 PoE Ethernet Fiber Optic Transceivers 10/01/2012 JPK
Table of Contents INTRODUCTION .................................................................................................. 3 FUNCTIONAL DESCRIPTION ............................................................................. 3 MODULE INSTALLATION.................................................................................... 3 PoE POWER SUPPLY INSTALLATION............................................................... 3 CONNECTIONS ................................................................
INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek Series 46 PoE Ethernet Fiber Optic Transceiver. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product. FUNCTIONAL DESCRIPTION The Series 46 PoE Transceiver operates as a 3 port Ethernet switch / media converter.
ETHERNET COPPER INPUT / OUTPUT CONNECTIONS Two RJ-45 Ethernet ports are provided on this unit. The UTP Ethernet input/output connections are made via RJ45 plugs. For optimum performance the shortest length of UTP wire practical should be used.
LED INDICATORS UTP LINK/ACT Green Red Ethernet Data Rate 1000 BASE-T (will not transmit over fiber port) 100 BASE- TX Amber 10 BASE- T OLI Green OLI Status DC Power is on and optical power is at proper level DC Power is on but optical power is missing or at incorrect level RED Ethernet Data Status Blink – UTP Link established and Data Activity Solid – UTP Link established and No Data Activity OFF – UTP Link is not established Blink – UTP Link established and Data Activity Solid – UTP Link establishe
PoE POWER SUPPLY ASSEMBLY L L N +V +V -V -V BLACK +V -V WHITE SIDE VIEW N FRONT VIEW DC OK SIDE VIEW 4.172 DC CABLE (18") 99-01-0439-50 3.298 BLACK WHITE 4.730 4.
LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return. All returns must be shipped prepaid. This warranty is void if the products have been tampered with.
