Instruction Manual Series-48 Ethernet Data Transceiver 2012_4_1JPK
INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek Series 48 Series Ethernet data transceiver. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product. FUNCTIONAL DESCRIPTION The Series 48 Transceiver operates as a 3 port Ethernet switch / media converter.
The Series 48 module is shown below: Series 48 STATUS INDICATORS The Series 48 module provides the following LED status indicators to aid in installation and troubleshooting: LINK / ACTIVITY UTP1 and UTP2 These LEDs indicate Data Link and Activity on the UTP and fiber ports.
The Series 48 Rackcard is shown below. Series 48 STATUS INDICATORS The Series 48 module provides the following LED status indicators to aid in installation and troubleshooting: LINK / ACTIVITY UTP1 and UTP2 These LEDs indicate Data Link and Activity on the UTP and fiber ports.
This unit complies with 21 CFR 1040.10 and 1040.11 LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return. All returns must be shipped prepaid.