Spec Sheet

OVERVIEW FEATURES
[ AFI510-24G Series ]
19
inch 1U rack or desktop/shelf mount
0°C to +50°C temperature for commercial grade
applications
90-264VAC mains power input
Compliant with all IEEE 802.3 speeds (i/u/ab/z/ae)
Dual Speed SFP or SFP+ ports (up to 10Gb Speed)
Supports RSTP, MSTP, ERPS, SNMP v1-3
and IGMP v1-3
Po
rt trunk functionality available with LACP
IE
EE 802.1x port security enabled
Supports 9.6K bytes jumbo frames
Virtual Stacking supported
Layer 3 Static Routing
AFI 3 Year
Support Warranty
AFI510-24G SERIES
26/28 PORT COMMERCIAL GRADE
MANAGED LAYER 2+ SWITCH
Commercial Ethernet Solutions
AFI's fully managed layer 2+
Ethernet switch
es provide 100Mbps,
Gigabit and 10 Gigabit Ethernet
switching for commercial network
applications. Available with 24x RJ45
Gigabit ports supporting optional
30W PoE+ and 2x Gigabit SFP or RJ45/SFP
Combo ports or 4x 1/10 Gigabit SFP+ Ports.
up to x24
up to x24
up to x2
up to x4
1/10 Gb
up to x2
AFI510 series
layer 2+ managed Ethernet switches are
designed for 19inch rack or desktop mounting within
commercial grade applications. The AFI510-24G series
has 24 Gigabit Ethernet RJ45 ports with optional IEEE
802.3at compliant 30W PoE+ and an additional 2 multi-
rate SFP only or RJ45/SFP combo ports that support
both 100Mb and 1Gb speeds or 4 multi-rate SFP+ ports
that support 100Mb, 1Gb, 2.5Gb or 10Gb speeds for
maximum flexibility.
AFI's industry leading virtual stacking capability greatly
simplies the installation and on-going site maintenance
by providing the users with a single web GUI interface
from which all switches within the virtual stack can
be congured and monitored eliminating the need for
multiple browser tabs and having to remember many IP
management addresses. The virtual stack can be used
between all AFI510 series models even when installed in
dispersed physical locations.
The AFI510 series support a wide range of management
functions as well as Rapid Spanning Tree, Multiple
Spanning Tree and Ethernet Ring Protection Switching
(ERPS) protocols for network redundancy. IGMP
functionality is supported to handle the multicast traffic
which is commonly used in IP CCTV deployments.
Virtual
Stacking
0 ~ +50°C
Rack/Surface
PSU
Mains

Summary of content (4 pages)