Spec Sheet

Specifications
Data
Fiber Type
Description
Part Number
Max.
Distance
(Km)
No.
of
slots
Wavelengths
(nm)
Options
Notes:
Ordering Information
Optical Power
Budget
(dB)
1-ch bidirectional Data Transceiver
Multi-mode
(62.5/125μm)
FT010DB-SMRT
23
FT040DB-SSTR
1-ch bidirectional Data Transceiver
4-ch bidirectional Data Transceiver
Single-mode
(9/125μm)
1310 | 1550 17
FT010DB-SSRT
20 1
Electrical and Mechanical
4-ch bidirectional Data TransceiverFT040DB-SMTR
 Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the
network.
 Operating distance of multimode is limited by the characteristics of the fiber bandwidth.
 Power adaptor is manufactured by third party and is supplied with fitted screw - terminal output cables.
 Please feel free to consult factory for any special requirement and customization.
Power Adaptor
Rack Mount Chassis
4 1
Data Input / Output
Optical Input / Output
Power (Standalone)
Power (Rack-Mount)
7-pin screw terminals
ST (standard), FC (optional)
2-pin screw terminal block
Bus connector
Connectors
LED
Data In / Out
Optical Carrier Detected
Power
Red/Green LED lit
Yellow / Active
Red/On
1-ch bidirectional Data TransceiverFT010DB-SMTR
1310 | 1550
4-ch bidirectional Data Transceiver
1310 | 1550 23
FT040DB-SMRT
4 2
1-ch bidirectional Data TransceiverFT010DB-SSTR
FT040DB-SSRT 4-ch bidirectional Data Transceiver
1310 | 1550 17 20 2
FT010DB / FT040DB
IS O 90 01 :20 00
FM 8 86 38
Number of Channels
Data Direction
Data Interface
Selection Method
Data Rate
Data Format
1 / 4
Bi-directional
RS232, RS422, RS485 2 or 4-wire Tri-state
DIP switch-selectable
0~256kbps
MPD (Manchester, Bi-phase, etc)
FT010DB
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 3.6W
From FT-C18 Chassis
156 x 30.5 x 223mm(Max)
148 x 20.4 x 213mm(Max)
0.6kg
0.16kg
FT040DB
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 3.6W
From FT-C18 Chassis
156 x 50.5 x 223mm(Max)
148 x 41.4 x 213mm(Max)
0.78kg
0.28kg
 ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMTR.
 For Standalone type, please add “SA”. E.g. SMTRSA
 Please feel free to consult factory if longer transmission distance is required.
 Power adaptor is included in Standalone type only.
 FT-C18 is to be purchased separately. Please refer to accessories section for the details.
Environmental
Operating Temp
Storage Temp
Relative Humidity
MTBF
-40°C to +75°C
-40°C to +85°C
0 to 95% non-condensing
> 100,000 hours
Video Transmission
www.ot-systems.com
2