Spec Sheet

Specifications
Data
Fiber Type
Description
Part Number
Max.
Distance
(Km)
No.
of
slots
Wavelengths
(nm)
Options
Notes:
 ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMT.
 For Standalone type, please add “SA”. E.g. SMTSA
 Please feel free to consult factory if longer transmission distance is required.
Ordering Information
Optical Power
Budget
(dB)
1-ch Video Transmitter / Receiver with 1-ch bidirectional
Data & 10/100 Mbps Ethernet Transceiver
2-ch Video Transmitter / Receiver with 1-ch bidirectional
Data & 10/100 Mbps Ethernet Transceiver
Multi-mode
(62.5/125μm)
FT210DBE-SMT
FT210DBE-SMR
1310 | 1550
1310 | 1550
23
23
FT410DBE-SST
FT410DBE-SSR
FT110DBE-SST
FT110DBE-SSR
17 201-ch Video Transmitter / Receiver with 1-ch bidirectional
Data & 10/100 Mbps Ethernet Transceiver
2-ch Video Transmitter / Receiver with 1-ch bidirectional
Data & 10/100 Mbps Ethernet Transceiver
4-ch Video Transmitter / Receiver with 1-ch bidirectional
Data & 10/100 Mbps Ethernet Transceiver
Single-mode
(9/125μm)
1310 | 1550
1310 | 1550
17
17
FT110DBE-SMT
FT110DBE-SMR
FT210DBE-SST
FT210DBE-SSR
20
20 2
2
2
Electrical and Mechanical
4-ch Video Transmitter / Receiver with 1-ch bidirectional
Data & 10/100 Mbps Ethernet Transceiver
1310 | 1550 23FT410DBE-SMT
FT410DBE-SMR
 Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the
network.
 Operating distance of multimode is limited by the characteristics of the fiber bandwidth.
 Power adaptor is manufactured by third party and is supplied with fitted screw - terminal output cables.
 Please feel free to consult factory for any special requireme
nt and customization.
Power Adaptor
Rack Mount Chassis
0.55 2
0.55 2
0.55 2
Video Input / Output
Optical Input / Output
Data Input / Output
Ethernet
Power (Standalone)
Power (Rack-Mount)
BNC
ST (standard), FC (optional)
7-pin screw terminal
8-pin RJ45
2-pin screw terminal
Bus connector
Connectors
LED
Video Signal Indication (Presence)
Ethernet In / Out
Data In / Out
Optical Carrier Detected
Power
Green LED lit
Amber / Green LED lit
Red/Green LED lit
Yellow / Active
Red/On
1310 | 1550
Video
Number of Channels
Format
Input/Output
Bandwidth
Differential Gain
Differential Phase
SNR-CCIR weighted
FT110DBE / FT210DBE / FT410DBE
IS O 90 01 :2000
FM 8 86 38
1 / 2 / 4 / 8
NTSC/PAL/SECAM
1 Volt pk-pk (75 ohms)
>=6MHz
<1% Typical
<1 Degree Typical
>65dB
Number of Channels
Data Direction
Data Interface
Selection Method
Data Rate
Data Format
1
Bi-directional
RS232, RS422, RS485 2 or 4-wire Tri-state
DIP switch-selectable
0~256kbps
MPD (Manchester, Bi-phase, etc)
FT110DBE / FT210DBE
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 5.4W
From FT-C18 Chassis
156 x 50.5 x 223mm(Max)
148 x 41.4 x 213mm(Max)
0.76kg
0.4kg
FT410DBE
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 6W
From FT-C18 Chassis
156 x 50.5 x 223mm(Max)
148 x 41.4 x 213mm(Max)
0.8kg (Max)
0.32kg (Max)
 Power adaptor is included in Standalone type only.
 FT-C18 is to be purchased separately. Please refer to accessories section for the details.
Environmental
Operating Temp
Storage Temp
Relative Humidity
MTBF
-40°C to +75°C
-40°C to +85°C
0 to 95% non-condensing
> 100,000 hours
Video Transmission
www.ot-systems.com
2