Spec Sheet

Specifications
Audio
Fiber Type
Description
Part Number
Max.
Distance
(Km)
No.
of
slots
Wavelengths
(nm)
Options
Notes:
 ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMT.
 For Standalone type, please add “SA”. E.g. SMTSA
 Please feel free to consult factory if longer transmission distance is required.
Ordering Information
Optical Power
Budget
(dB)
1- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
2- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
Multi-mode
(62.5/125μm)
FT220AB-SMT
FT220AB-SMR
1310 | 1550
1310 | 1550
23
23
8- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
FT420AB-SST
FT420AB-SSR
1310 | 1550 17
FT120AB-SST
FT120AB-SSR
17 201- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
2- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
4- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
Single-mode
(9/125μm)
1310 | 1550
1310 | 1550
17
17
20 2
FT120AB-SMT
FT120AB-SMR
FT220AB-SST
FT220AB-SSR
20
20 2
2
2
FT820AB-SST
FT820AB-SSR
Electrical and Mechanical
4- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
8- ch Video Transmitter / Receiver with 2-ch bidirectional
Audio Transceiver
FT820AB-SMT
FT820AB-SMR
1310 | 1550
1310 | 1550
23
23
FT420AB-SMT
FT420AB-SMR
 Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the
network.
 Operating distance of multimode is limited by the characteristics of the fiber bandwidth.
 Power adaptor is manufactured by third party and is supplied with fitted screw - terminal output cables.
 Please feel free to consult factory for any special requirement and customization.
Power Adaptor
Rack Mount Chassis
4 2
2 2
2 2
1 2
Video Input / Output
Optical Input / Output
Audio Input / Output
Power (Standalone)
Power (Rack-Mount)
BNC
ST (standard), FC (optional)
7-pin screw terminal
2-pin screw terminal
Bus connector
Connectors
LED
1310 | 1550
Video
Number of Channels
Format
Input/Output
Bandwidth
Differential Gain
Differential Phase
SNR-CCIR weighted
FT120AB / FT220AB / FT420AB / FT820AB
IS O 90 01:20 00
FM 8 86 38
1 / 2 / 4 / 8
NTSC/PAL/SECAM
1 Volt pk-pk (75 ohms)
>=6MHz
<1% Typical
<1 Degree Typical
>65dB
FT120AB / FT220AB / FT420AB
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 5.4W
From FT-C18 Chassis
156 x 50.5 x 223mm(Max)
148 x 41.4 x 213mm(Max)
0.8kg (Max)
0.32kg (Max)
FT820AB
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 6.6W
From FT-C18 Chassis
156 x 50.5 x 223mm(Max)
148 x 41.4 x 213mm(Max)
0.82kg
0.35kg
 Power adaptor is included in Standalone type only.
 FT-C18 is to be purchased separately. Please refer to accessories section for the details.
1
Bi-directional
Balanced or Unbalanced
0 dBm(nominal), 10K ohms
+4dBm
20Hz-20KHz
>66dB
Number of Channels
Audio Direction
Input / Output Type
Input Level / Impedance
Output Level
Bandwidth
Signal-to-Noise Ratio(SNR)
Video Signal Indication (Presence)
Audio In / Out
Optical Carrier Detected
Power
Green LED lit
Red/Green LED lit
Yellow / Active
Red/On
Environmental
Operating Temp
Storage Temp
Relative Humidity
MTBF
-40°C to +75°C
-40°C to +85°C
0 to 95% non-condensing
> 100,000 hours
Video Transmission
www.ot-systems.com
2
