Spec Sheet

91PxxxxE-SL
Series
Singlemode
SPECIFICATIONS:
Video:
I/0 Level .......................................... 1Vp-p
I/0 Impedance.................................... 75 Ω
Bandwidth....................................... 7 MHz
Differential Gain................................... 2%
Differential Phase ............................... 0.7°
SNR ................................................ 67 dB
Connector.......................................... BNC
Ethernet: (2 ports)
Data Rate:
Auto negotiated……….……….10/100 Mb/s
Connector………………………………RJ45
Optical:
Wavelength……………………1300/1550nm
Loss Budget (9/125µ)………………. 15 dB
Distance………………………………...20 km
Connector…………………………………..FC
Data : Optional
Interface….….……Selectable Multi-protocol
Choice of: RS-485 (2 or 4 wire),
RS-422,
RS-232
Manchester
Format.................................Asynchronous
Rate .................................DC to 115 Kbit/s
Connector........................... Terminal Block
Contact Closure: Optional
Input.................. Switch Closure to Ground
Output .....................................Dry Contact
Response Time .................................2 mS
Max Voltage ............... 30 VDC or Peak AC
Max Current....................................... 0.5 A
Connector……………………Terminal Block
Environmental
Operating Temp…...............-40°C to +75°C
Storage Temp……..………..-40°C to +85°C
Humidity…….0% to 95% (non condensing)
MTBF……………………….>100,000 hours
Power Supply:
Module – 12 VDC (AFI Part # PS-12D)
Rack Card – AFI SR 20/2
Size:
Module - 8 ⅛” x 4 ⅛ “x 1
5
/
8
”
Rack Card requires 1 rack slot – 6½" x2"x5"
12/2018 vv
9/15/11 JPK
One Way Digital Video, (2) 10/100Base-TX
Ethernet, & (up to 4) Multi-Protocol Data and/or
Contact Closures Transceiver
The American Fibertek 91PxxxxE-SL Series transmits high-quality, state of
the art, 10-bit digital video, (2) 10/100Base-TX Ethernet ports, and up to (4)
Multi-Protocol (switch selectable) Data and/or Contact Closures on one
singlemode optical fiber. Diagnostic indicators provide a quick visual
indication of system status.
Designed to be completely transparent, this system requires no field
adjustments at installation or additional maintenance thereafter.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cage: SR20/2
Product Ordering Information:
MT-91PxxxxE-SL Module Transmitter
MR-91PxxxxE-SL Module Receiver
RT-91PxxxxE-SL Rack Card Transmitter
RR-91PxxxxE-SL Rack Card Receiver
Data : x = 5
Contact Closure : x = 9
MT-
91PxxxxE
MR-
91PxxxxE
One Singlemode Fiber
Video
Ethernet(2)
Data or Contact
Closure (4)
Video
Ethernet(2)
Data or Contact
Closure (4)