Data Sheet

9PXXXSL
Series
Singlemode
FEATURES:
 24Bit Digital Audio
 Diagnostics: Audio, Data, Contact,
Power & Optical Presence

Automatic Resettable Fuses on Power
Lines
SPECIFICATIONS:
Audio:
I/O Level @ 600 Ohms .................... 0 dBm
Bandwidth .........................20 Hz to 20 KHz
THD @ 1 KHz .....................................0.1%
SNR................................................... 80 dB
Connector ......................... Terminal Block
Data :
Interface….
485(2 or 4 Wire)
RS422
RS232
Data Format ..............Asynchronous, Serial
Data Rate............................ DC to 115 Kbs
Connector ........................... Terminal Block
Contact Closure:
Input ...................Switch Closure to Ground
Output ......................................Dry Contact
Response Time.................................. 2 mS
Max Voltage ..............100 VDC or Peak AC
Max Current ....................................... 0.5 A
Connector……………………Terminal Block
Optical:
Wavelength…………………..1310/1550 nm
Loss Budget (9/125µ)………………. 21dB
Connector………………………………….FC
Environmental
Operating Temp………........-40°C to +75°C
Storage Temp…………...….-40°C to +85°C
Humidity……..0% to 95% (non condensing)
MTBF………….…………….>100,000 hours
Power Supply:
Module – 12 VDC (AFI Part # PS-12D)
Rack Card – AFI SR 20/2
Size:
Module - …………………8 ⅛” x 4 ⅛ “x 1⅛ ”
Rack Card requires 1 rack slot – 6½" x1"x5"
Product Ordering Information:
MT-9PXXXSL Module Transmitter
MR-9PXXXSL Module Receiver
RT-9PXXXSL Rack Card Transmitter
RR-9PXXXSL Rack Card Receiver
Data X=5
Audio X=8
Contact X=9
12/2013
Single Fiber 3 Channel Bi-directional Transceiver:
Digital 24 Bit Audio or Multi-Protocol Data or
Contact Closure
The American Fibertek 9PXXXSL Series transmits up to 3 channels of either
high-quality, state of the art, 24bit digital audio and/or multi-protocol data
and/or contact closure channel on one singlemode optical fiber. Any
combination of audio, data or contact is available up to 3 channels. This link
is capable of providing an optical loss budget of 21dB utilizing
1310nm/1550nm wavelength lasers.
Designed to be completely transparent, this system requires no field
adjustments at installation or additional maintenance thereafter. Diagnostic
indicators provide a quick visual indication of system status.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cages: SR-20/2 or SR20H/2
(redundant power supply option).
MT-
9PXXXSL
RR-
9PXXXSL
One Singlemode Fiber
Ch 1
Ch 2
Ch 3
Ch 1
Ch 2
Ch 3