Data Sheet

46-SL-PoE
SERIES
SINGLEMODE
FEATURES:
♦ Complete Fiber Optic to Twisted Pair
Media Interface
♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100 Ports
♦ Link and Activity Indicators for UTP
and Fiber Ports
♦ Singlemode and Multimode Fiber
Versions Available
♦ Power Over Ethernet on Both Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ............ 10/100 Mb/s
Connector.................................RJ45
PoE (2 RJ45 ports)............... 802.3af
PoE (1 RJ45 port)................. 802.3at
Optical:
One Fiber.................. 1310/1550 nm
Two Fiber............................ 1310 nm
Source ................................... Laser
Distance
FX 9/125u............................ 20 km
Loss Budget ............................20 dB
Connector............................. SC, ST
Power:
Voltage ................................ 48 VDC
Current................................ 200 mA
Connector........2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 30W (Sold separately)
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module..................... 4¼” x 4¼” x 1⅛”
10/23/12 JPM
10/100 Base-T to 100 Base-FX Ethernet Media
Converter / 3 Port Switch with PoE
The American Fibertek 46SL-PoE Series transmits and receives (2) copper
10/100/1000 Base-T Ethernet signals at the RJ45 ports and (1) optical 100
Base-FX over 1 or 2 singlemode fibers. The system is comprised of two units
forming a point-to-point communications link.
The 46SL-PoE Series sources power to devices from the RJ45 ports over the
copper connection. Both RJ45 ports may be used to deliver low power
802.3af (15 watts) to devices. A single RJ45 port is used to deliver high
power 802.3at (30 watts) to a single device. An external power supply is
required for the PoE module.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed (10/100
Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MTX-46-FX-SL-SC-PoE One Fiber Module Transmitter FX Singlemode SC Connector
MTX-46-FX-SL-ST-PoE One Fiber Module Transmitter FX Singlemode ST Connector
MX-46-FX-SL-SC-PoE Two Fiber Module FX Singlemode SC Connector
MX-46-FX-SL-ST-PoE Two Fiber Module FX Singlemode ST Connector
POWER SUPPLY:
PS-48D Universal Input to 48V 30W Output 0 to 50°C
PS-4830 Universal Input to 48V 30W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.