Data Sheet

49-PoE
SERIES
MULTIMODE
FEATURES:
♦ Complete Fiber Optic to Twisted Pair
Media Interface
♦ Drop and Repeat Capability
♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100/1000 Ports
♦ Link and Activity Indicators for UTP
and Fiber Ports
♦ Singlemode and Multimode Fiber
Versions Available
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ..........10/100/1000 Mb/s
Connector.......................................RJ45
PoE (2 RJ45 ports)..................... 802.3af
PoE (1 RJ45 port)....................... 802.3at
Optical:
One Fiber ........................ 1310/1550 nm
Two Fiber
-SX ........................................... 850 nm
-LX.......................................... 1310 nm
Distance/Loss Budget
SX
-62/125u .................................... 220 m
-Loss Budget ...............................7 dB
LX
-62/125u .................................... 550 m
-Loss Budget ..............................10 dB
Connector................................ ….SC,ST
Power:
Voltage .......................................48 VDC
Current ..................................... 200 mA
Connector.............. 2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 30W (Sold separately)
Environmental:
Temperature................. -40 °C to +75 °C
Humidity ..............................5 % to 95 %
Size:
Module ...........................4¼” x 4¼”
x 1⅛”
10/23/12 JPM
(2) 10/100/1000Base-T & (2) 1000Base-SX/LX Ethernet
4 Port Switch / Drop & Repeat Transceiver with PoE
The American Fibertek 49-PoE Series transmits and receives (2) copper
10/100/1000 Base-T Ethernet signals at the RJ45 ports and (2) optical 1000
Base-X over 1 or 2 multimode fibers. The system is comprised of two or more
units forming a communications link.
The 48SL-PoE Series also sources power to devices from the RJ45 ports
over the copper connection. Both RJ45 ports may be used to deliver low
power 802.3af (15 watts) to devices. A single RJ45 port is used to deliver
high power 802.3at (30 watts) to a single device. An external power supply is
required for the PoE module.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-49-SX-SC-PoE Two Fiber/Port, Module SX Multimode SC Connector
MX-49-LX-SC-PoE Two Fiber/Port, Module LX Multimode SC Connector
MX-49-LX-1F-SC-PoE One Fiber/Port, Module LX Multimode SC Connector
MX-49-SX-ST-PoE Two Fiber/Port, Module SX Multimode ST Connector
MX-49-LX-ST-PoE Two Fiber/Port, Module LX Multimode ST Connector
MX-49-LX-1F-ST-PoE One Fiber/Port, Module LX Multimode ST Connector
POWER SUPPLY:
PS-48D Universal Input to 48V 30W Output 0 to 50°C
PS-4830 Universal Input to 48V 30W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.