Data Sheet

49-PoE-HP
SERIES
MULTIMODE
FEATURES:
 Complete Fiber Optic to Twisted Pair
Media Interface
 Drop and Repeat Capability
 Auto MDI / MDIX Detection
 Auto Negotiate 10/100/1000 Ports
 Link and Activity Indicators for UTP and
Fiber Ports
 Singlemode and Multimode Fiber
Versions Available
 Power (60 Watts) Over Ethernet on 1
Port
 Two RJ45 Data Ports Available
 Extended Temperature Range
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ..........10/100/1000 Mb/s
Connector.......................................RJ45
PoE (1 port) ……………..…60 Watts
Optical:
One Fiber ........................ 1310/1550 nm
Two Fiber
-SX ........................................... 850 nm
-LX.......................................... 1310 nm
Distance/Loss Budget
SX
-62/125u .................................... 220 m
-Loss Budget ...............................7 dB
LX
-62/125u .................................... 550 m
-Loss Budget ..............................10 dB
Connector................................….SC,ST
Power:
Voltage.......................................48 VDC
Current ..................................... 200 mA
Connector.............. 2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 60W (Sold separately)
Environmental:
Temperature.................-40 °C to +75 °C
Humidity ..............................5 % to 95 %
Size:
Module ......................... 4.3” x 4.3” x 1.2”
Power Supply .............. 4.6” x 3.6” x 1.6”
5/31/16 JPK
(2) 10/100/1000Base-T & (2) 1000Base-SX/LX Ethernet
4 Port Switch / Drop & Repeat Transceiver with 60W PoE
“Approved for AXIS Q6032-E PTZ Dome Network Camera”
The American Fibertek 49-PoE-HP Series transmits and receives (2) copper
10/100/1000 Base-T Ethernet signals at the RJ45 ports and (2) optical 1000
Base-(LX or SX) over 1 or 2 multimode fibers. The system is comprised of
two units forming a point-to-point communications link.
The 49-PoE-HP Series also sources up to 60 Watts of power to an Ethernet
powered device (PD) from one RJ45 port. The power is carried over all 4
pairs of the Ethernet cable. However, it is required that the PD have
independent discovery and classification interfaces for both the data pair and
the spare pair of the Ethernet cable.
Both RJ45 ports may be used to deliver Ethernet data to devices. An external
power supply is required.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-49-SX-SC-PoE-HP Two Fiber/Port, Module SX Multimode SC Connector
MX-49-LX-SC-PoE-HP Two Fiber/Port, Module LX Multimode SC Connector
MX-49-LX-1F-SC-PoE-HP One Fiber/Port, Module LX Multimode SC Connector
MX-49-SX-ST-PoE-HP Two Fiber/Port, Module SX Multimode ST Connector
MX-49-LX-ST-PoE-HP Two Fiber/Port, Module LX Multimode ST Connector
MX-49-LX-1F-ST-PoE-HP One Fiber/Port, Module LX Multimode ST Connector
POWER SUPPLY:
PS-4860 Universal Input to 48V 60W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.