Data Sheet
MX-6p-
FX-PoE
SERIES
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Link and Activity Indicators for UTP
and Fiber Ports
SFP Optical and Copper Plug-ins
Available
10/100Base-TX Speed On Copper
Ports
Power Over Ethernet on All Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ...........................10/100 Mb/s
Connector...............................................RJ45
PoE (4 RJ45 ports)……..…802.3af 15 Watts
PoE+ (4 RJ45 ports) ……… 802.3at 30 Watts
Optical:
Distance/Loss Budget
FX Multimode
-62/125u ...............................................2 km
-Loss Budget .....................................11 dB
FX Singlemode
-9/125u ...............................................15 km
-Loss Budget ......................................16 dB
Connector......................................….Dual LC
Power:
Voltage ..........................................48-52 VDC
Current (no external PD load) ............ 100 mA
Connector...................... 2 Pin Terminal Block
Environmental:
Temperature.........................-40 °C to +75 °C
Humidity.......................................5 % to 95 %
Size:
Module................................... 7
5
⁄
8
"
x 5
1
⁄2
"
x 1
1
⁄
8
"
12/15/13 JPK
(4) 10/100Base-TX & (2) 100Base-FX SFP
Ethernet 6 Port Switch with PoE/PoE+
The American Fibertek MX-6p-FX-PoE Series transmits and receives (4) copper
10/100 Base-TX Ethernet signals at the RJ45 ports and (2) optical 100 Base-FX over 1
or 2 optical fibers. The system is comprised of two or more units forming a
communications link.
The Series MX-6p-PoE Series also sources power to devices from the RJ45 ports over
the copper connection. All 4 RJ45 ports may be used to deliver dc power (802.3af 15
watts) or (802.at 30 watts) to PD devices.
The MX-6p-PoE is targeted for applications where the customer has 48 volts available
(such as in security monitoring of solar farms). An external 48 volt power supply,
provided by the customer, needs to provide the required watts for the application. The
recommended watts for 4 ports of 802.3af and 802.3at is 60 watts and 120 watts
respectively.
The system is designed to be completely transparent with auto negotiation features
which automatically configures the unit for the correct speed (10/100 Base-TX). Auto
MDI/MDIX operation eliminates the potential need for crossover cables. Diagnostic
indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-6p-FX-PoE 6 Port, Module
Power Supply not included. Contact AFI for products which include a power supply.
RECOMMENDED POWER SUPPLIES:
PS-48D...................................................................................... 30 Watts 0 to 50°C
PS-4830 .................................................................................30 Watts -40 to 75°C
PS-4860 .................................................................................60 Watts -40 to 75°C
PS-48120 .............................................................................120 Watts -40 to 75°C