Data Sheet
MX-6p-PoE-HP
SERIES
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Link and Activity Indicators for UTP
and Fiber Ports
SFP Optical and Copper Plug-ins
Available
10/100Base-TX Speed On Copper
Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ...........................10/100 Mb/s
Connector...............................................RJ45
PoE-HP (up to 2 RJ45 ports)…….…60 Watts
PoE,PoE+ (up to 2 RJ45 ports) ..15, 30 Watts
Optical:
Two Fiber
-SX.................................................... 850 nm
-LX.................................................. 1310 nm
-ZX.................................................. 1550 nm
Distance/Loss Budget
SX
-62/125u ............................................ 220 m
-Loss Budget .......................................7 dB
LX
-62/125u ............................................ 550 m
-Loss Budget ......................................10 dB
-9/125u .................................................5 km
-Loss Budget .....................................12 dB
ZX
-9/125u ...............................................70 km
-Loss Budget .....................................23 dB
Connector......................................….Dual LC
Power:
Voltage ..........................................48-52 VDC
Current (no external PD load) ............ 100 mA
Connector...................... 2 Pin Terminal Block
Environmental:
Temperature.........................-40 °C to +75 °C
Humidity.......................................5 % to 95 %
Size:
Module................................... 7
5
⁄
8
"
x 5
1
⁄2
"
x 1
1
⁄
8
"
11/15/13 JPK
(4) 10/100Base-TX & (2) 1000Base-X SFP
Ethernet 6 Port Switch with High Power PoE (60W)
“Approved for AXIS Q6032-E PTZ Dome Network Camera”
The American Fibertek MX-6p-PoE-HP Series transmits and receives (4) copper
10/100 Base-TX Ethernet signals at the RJ45 ports and (2) optical 1000 Base-X over 1
or 2 optical fibers. The system is comprised of two or more units forming a
communications link.
The MX-6p-PoE-HP Series also sources up to 60 Watts of power to an Ethernet
powered device (PD) for up to 2 RJ45 ports. The power is carried over all 4 pairs of the
Ethernet cable. However, it is required that the PD have independent discovery and
classification interfaces for both the data pair and the spare pair of the Ethernet cable.
If only a single RJ45 port requires 60 Watts, 2 of the other RJ45 ports are available to
source up to 30 Watts each. An external power supply is required.
The MX-6p-PoE is targeted for applications where the customer has 48 volts available
(such as in security monitoring of solar farms). An external 48 volt power supply,
provided by the customer, needs to provide the required watts for the application.
The system is designed to be completely transparent with auto negotiation features
which automatically configures the unit for the correct speed (10/100 Base-TX). Auto
MDI/MDIX operation eliminates the potential need for crossover cables. Diagnostic
indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-6p-PoE-1HP 6 Port, 1 PoE 60W Port 1, two 15/30W Ports 3&4, Module
MX-6p-PoE-2HP 6 Port, 2 PoE 60W Ports 1&3, Module
Power Supply not included. Contact AFI for products which include a power supply.
RECOMMENDED POWER SUPPLY:
PS-48120.................................................................................................120 Watts