af i af i af i af i af i ! af i american fibertek af i af i af i af i af i ! Instruction Manual RT-96400C-SL RR-96400C-SL Sixty Four Channel Video Multiplexer 10/31/2012 JPK
Table of Contents Functional Description ........................................................................3 RT-96400C-SL Components...............................................................4 RR-96400C-SL Components ..............................................................5 Power Connections .............................................................................5 Fiber Connections ...............................................................................
INSTALLATION AND OPERATION INSTRUCTIONS INTRODUCTION Thank you for purchasing your American Fibertek Series 96400C-SL singlemode sixty-four channel video multiplexer. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product. FUNCTIONAL DESCRIPTION The 96400C-SL Series units operate as a transmitter / receiver pair for the digital transmission of forty-eight simultaneous NTSC or PAL video signals over one single-mode fiber optic cable.
RT-96400C-SL COMPONENTS The RT-96400C-SL consists of the following components: 1) RT-980C-1470 1) RT-980C-1530 1) RT-980C-1530 1) RT-980C-1490 1) RT-980C-1550 1) RT-980C-1530 1) RT-980C-1510 1) RT-980C-1570 1) MTX-CWDM-8 2) SR-20 2)PSR-2 8) PCSC/UPC-0.4 6) BPS-2 The individual 980C-XXXX series video rack cards that make up the RT-96400C-SL are combined in a rack mount configuration using the SR-20 sub-rack.
RR-96400C-SL COMPONENTS The RR-96400C-SL consists of the following components: 1) RR-980C-1470 1) RR-980C-1530 1) RR-980C-1590 1) RR-980C-1490 1) RR-980C-1550 1) RR-980C-1610 1) RR-980C-1510 1) RR-980C-1570 1) MRX-CWDM-8 2) SR-20 2) PSR/2 8) PCSC/UPC-0.4 6) BPS-2 The individual 980C-xxxx series video rack cards and that make up the RR-96400C-SL are installed in a manner similar to the RT-96400C-SL (see drawing below).
RT-96400C-SL, RR-96400C-CL FIBER CONNECTIONS The fiber optic connection to the user’s infrastructure is made via a SC connector located at the back of the CDWM unit next to the power input. Be sure to allow sufficient room for the required minimum bend radius of the fiber cable used. SC patchcords are supplied for the intra-fiber connections between the CWDM and each of the 980C-XXXX series units.
VIDEO INPUT / OUTPUT CONNECTIONS Video input and output connections are located on the rear of the 980C-xxxx series units. A BNC connector is provided for each channel. The video inputs are connected to an appropriate 75 baseband video source such as a camera or a video recorder output. The 75 video outputs can be looped through typical baseband video inputs of switchers, recorders and other equipment as required. For proper operation, the outputs must be terminated with 75.
RR-980C-XXXX SERIES STATUS INDICATORS Each of the RR-980C-XXXX series receivers provides the following front panel LED status indicators to aid in installation and troubleshooting: VIDEO 1 THROUGH VIDEO 8 A bi-color LED indicator is provided for the each of the eight video outputs from the RR-980CXXXX series receivers. Video status associated with each of these LED’s is summarized below.
LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return. All returns must be shipped prepaid. This warranty is void if the products have been tampered with.