Spec Sheet

The American Fibertek M3600C-P Series transmits one channel of PFM
video with reverse Up-the-Coax PTZ Control on one singlemode optical fiber.
Designed to be used with Panasonic VD2 “Up the Coax” Control System
products, these systems require no field adjustments at installation or
additional maintenance thereafter.
Diagnostic indicators provide a quick visual indication of system status.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cage: SR-20/2
Video/Data
ONE
SINGLEMODE
FIBER
M3600C-P
SERIES
SINGLEMODE
FEATURES:
 Diagnostics: Power, Video and Optical
Presence
 Compatible with NTSC; RS-170A & RS-
343A and PAL
 Video with Reverse Up-the-Coax PTZ
over one Singlemode Fiber
 Modules or Rack Cards
 PFM Video Transmission
SPECIFICATIONS:
Video:
I/0 Level............................................ 1Vp-p
I/0 Impedance.....................................75 Ω
Bandwidth........................................ 7 MHz
Differential Gain................................... 3 %
Differential Phase ..................................2 °
SNR ................................................. 55 dB
Connector...........................................BNC
Data:
Control System Compatibility
-Panasonic
Optical:
Wavelength ........................ .1300/1550 nm
Loss Budget (9/125µm fiber)............. 10 dB
Distance ……………………………….1 mile
-Limited by the Panasonic units
Connector..............................................FC
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Module – 12 Vdc : 400 mA
Rack Card – AFI SR 20/2
Size:
Module ......................... 81/8” x 41/8 x 11/8”
Rack Card requires 1 rack slot– 6½”x5”x1”
Product Ordering Information:
MTM-3600C-P Module Transmitter
MRM-3600C-P Module Receiver
RTM-3600C-P Rack Card Transmitter
RRM-3600C-P Rack Card Receiver
See 3600C for alternative
Up-the-Coax versions
8/12 JPK
SINGLE CHANNEL VIDEO
WITH PANSONIC COAXIAL VD2 PTZ CONTROL
MTM-3600C-P
MRM-3600C-P
Video/Data