Data Sheet

46-FX
SERIES
MULTIMODE
FEATURES:
♦ Complete Fiber Optic to Twisted Pair
Media Interface
♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100 Ports
♦ Link and Activity Indicators for UTP
and Fiber Ports
♦ Singlemode and Multimode Fiber
Versions Available
SPECIFICATIONS:
Ethernet:
Data Rate:
Auto negotiated ............. 10/100 Mbs
Connector.................................RJ45
Optical:
Two Fiber............................ 1310 nm
One Fiber...................1310/1550 nm
Source:
Multimode Two Fiber ............. LED
Multimode One Fiber............ Laser
Loss Budget ............................11 dB
Connector.............................. SC,ST
Power:
Voltage ................................ 12 VDC
Current................................ 500 mA
Connector........2 Pin Terminal Block
Power Supply:
Module:.......
12VDC (AFI Part #: PS-12D+)
Rack Card:.............(AFI Part #: SR-20/2)
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module..................... 4¼” x 4¼” x 1⅛”
Rack Card One Slot ...... 6½” x 1” x 5”
8/10/11JPK
10/100Base-T to 100Base-FX
Ethernet Media Converter / 3 Port Switch
The American Fibertek 46 Series transmits and receives (2) copper
10/100 BaseT Ethernet signals at the RJ45 ports and (1) optical 100
Base-FX over 1 or 2 multimode fibers. The system is comprised of
two units forming a point-to-point communications link.
The system is designed to be completely transparent with auto
negotiation features which automatically configures the unit for the
correct speed (10/100 BaseT). Auto MDI/MDIX operation eliminates
the potential need for crossover cables. Diagnostic indicators provide
a quick visual indication of system status.
Equipment may be ordered as stand alone modules or rack cards that
are mounted in the American Fibertek Card Cage: SR-20/2
ORDERING INFORMATION:
MX-46-FX-AA Two Fiber Module FX Multimode
RX-46-FX-AA Two Fiber Rack Card FX Multimode
MTX-46-FX-AA One Fiber Module Transmitter FX Multimode
MRX-46-FX-AA One Fiber Module Receiver FX Multimode
RTX-46-FX-AA One Fiber Rack card Transmitter FX Multimode
RRX-46-FX-AA One Fiber Rack card Receiver FX Multimode
Replace AA with ST or SC to specify the desired optical connector