Spec Sheet
48-ZX
SERIES
SINGLEMODE
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode Fiber
Triple Speed Copper Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ...10/100/1000 Mb/s
Connector.................................RJ45
Optical:
One Fiber.................. 1490/1550 nm
Two Fiber…………………….1550nm
Distance
ZX 9/125u............................ 70 km
Loss Budget ...........................24 dB
Connector..........................….SC/ST
Power:
Voltage ................................ 12 VDC
Current............................. < 500 mA
Connector........2 Pin Terminal Block
Power Supply:
Module:... 12VDC (Part #: PS-12D+)
Environmental:
Temperature...........-40
o
C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module...……………4¼” x 4¼” x 1
1
/
8
”
Rack Card One Slot ...... 6½” x 1” x 5”
6/17/16JPK
(2) 10/100/1000Base-T & (1) 1000Base-ZX
Ethernet Media Converter / 3 Port Switch
The American Fibertek 48ZX Series transmits and receives (2)
copper 10/100/1000Base-T Ethernet signals at the RJ45 ports and (1)
optical 1000 Base-ZX over 1 or 2 singlemode fibers up to a distance
of 70 km. The system is comprised of two units forming a
communications link.
The system is designed to be completely transparent with an auto
negotiation features which automatically configures the unit for the
correct speed (10/100/1000Base-T). Auto MDI/MDIX operation
eliminates the potential need for crossover cables. Diagnostic
indicators provide a quick visual indication of system status.
Equipment may be ordered as stand alone modules or rack cards that
are mounted in the American Fibertek Card Cage: SR-20/2
ORDERING INFORMATION:
MX-48-ZX-SC Two Fiber Module ZX Singlemode
RX-48-ZX-SC Two Fiber Rack Card ZX Singlemode
MTX-48-ZX-SC One Fiber Module Transmitter ZX Singlemode
MRX-48-ZX-SC One Fiber Module Receiver ZX Singlemode
RTX-48-ZX-SC One Fiber Rack card Transmitter ZX Singlemode
RRX-48-ZX-SC One Fiber Rack card Receiver ZX Singlemode
ST Connector : Replace SC with ST in above part number