When Demanding Conditions,Demand the Best 2017 Product Catalog Industrial SPECgrade Electrical Fittings ® Trust One Name AMERICAN FITTINGS Corporation ® © 2017 Manufactured in the USA Since 1946 amftgs.
AMERICAN AMERICAN FITTINGS Corporation SPEC-grade Industrial Electrical Fittings We Are the Perfect Connection for Agriculture Alternative Energy Data Centers Federal & State Projects Food Processing & Production Hospitals and Medical Centers Industrial Applications ® Infrastructure Construction Military Bases OEM Equipment Oil & Gas Projects Paper & Pulp Transportation Waste Water Treatment ® Innovating the Next Generation of Electrical Fittings For over 70 years, AMERICAN FITTINGS has been built an
Think American The NEXT GENERATION of Electrical Fittings Cord Grip Connectors Rigid Conduit Fittings Liquid Tight Fittings FMC Connectors EMT Fittings Accessories Alloy Steel Aluminum Stainless Steel Industrial SPECgrade Fittings in Alloy Steel, Aluminum & Stainless Steel Manufactured in the USA Since 1946 ® amftgs.com 800.221.
Made in the USA Since 1946 ® Discover the AMFICO Advantage to Buying Solid Steel Machined US Manufactured Industrial SPEC-grade Fittings We manufacture in New Jersey the finest and most cost effective electrical conduit fitting on the market. Solid USA steel and machined turned parts guarantee you faster installation and unique design characteristics not found in typical inferior die ca st products.
Cord Connectors Specification Grade Alloy Steel, Aluminum, Stainless Made in the USA Why Aren’t Your Cables Wearing the BEST ? STOP USING OUTDATED CORD CONNECTORS AND CONNECT WITH THE BEST! AMFICO Innovation Not Duplication AMERICAN FITTINGS Corporation ® Manufactured in the USA Since 1946 © 2017 042017.
Cord Grip Connectors ® The Superior Choice in Strain Relief Fitings Since 1946 All AMFICO Strain Relief Cord Connectors Will: Allow You to Choose the Correct Trade Size for a Wide Variety of Cable Types and Sizes Prevent Cable Pullout, Designed for Your Specified Range of Cord Control Arc of Bend to Meet Code Requirements Under Adverse Conditions Provide a Tight Seal Against the Toughest Elements such as Dirt, Oils, and Coolants Suitable for Neoprene, PVC Coated, Vinyl and Armored or Unarmored Cable.
AMFICO Cord Grip Connectors ® Dress Up Your Cords with the Best Since 1946 3/8” to 2” SPEC-grade Industrial and Commercial Cord Grip Connectors TM Extensive Cable Ranges with AMFICO Color Coded Grommets Materials Available: Alloy Steel Aluminum Stainless Steel Non-Metallic Nylon ALL Products Made in the USA Since 1946 AMFICO CG Series are for use with portable cords, including S, SO, STO, ST, SJ, SJT, SJTO and SVO.
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors Straight 1/2” - 1” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Alloy Steel with Zinc Plating Chromate Finish Aluminum * Add AL to Suffix on Cat # Stainless Steel ** Consult Factory for Availability C HEX Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors Straight 1 1/4 - 2” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Alloy Steel with Zinc Plating Chromate Finish Aluminum * Add AL to Suffix on Cat # Stainless Steel ** Consult Factory for Availability C HEX Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Division
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors 90° 1/2 - 1” Since 1946 AMFICO SPEC-grade 90° Cord Grip Connectors TM Materials: Compression Nuts Alloy Steel Fitting Body MI A1 Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) B C HEX A2 Featuring AMFICO EZ Torque Compression
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors 45° 1/2 - 1” Since 1946 AMFICO SPEC-grade 45° Cord Grip Connectors TM Materials: Compression Nuts Alloy Steel Fitting Body MI A1 Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) B C HEX A2 Featuring AMFICO EZ Torque Compression
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors Straight with Wire Mesh Strain Relief 1/2 - 1” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Fitting Body and Nut: Alloy Steel Wire Mesh: Stainless Steel Color Coded Grommet A Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors Straight with Wire Mesh Strain Relief 1 1/4 - 2” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Fitting Body and Nut: Alloy Steel Wire Mesh: Stainless Steel Color Coded Grommet A Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors * 90° with Wire Mesh Strain Relief 1/2 - 1” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Fitting Body Malleable Iron with Alloy Steel Nut Wire Mesh: Stainless Steel Color Coded Grommet A1 Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-
AMERICAN FITTINGS ® Standard Industrial Grade Cord Grip Connectors * 45° with Wire Mesh Strain Relief 1/2 - 1” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Fitting Body Malleable Iron with Alloy Steel Nut Wire Mesh: Stainless Steel Color Coded Grommet A1 Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-
AMERICAN FITTINGS ® SPECTRUM Cord Grip Connectors Straight 1/2 - 1” Since 1946 AMFICO SPEC-grade Cord Grip Connectors TM Materials: Alloy Steel with Zinc Plating Chromate Finish Aluminum * Add AL to Suffix on Cat # Stainless Steel ** Consult Factory for Availability Furnished with Steel Locknut and Color Coded Sealing Washer C HE X Spectrum Connectors Include Locknut & Sealing Washer A B D Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1
AMERICAN FITTINGS ® SPECTRUM Cord Grip Connectors Straight 1 1/4 - 2” Since 1946 AMFICO SPEC-grade Cord Grip Connectors HE C X TM CAT. # CG1 CG2 CG3 CG4 CG5 CG6 CG7 CG8 CG9 CG10 CG11 CG12 CG13 CG14 CG15 CG16 CG17 Cat # CG18 CG19 CG20 CG21 CG22 CG23 CG24 CG25 CG26 CG27 CG28 CG29 CG30 CG31 CG32 CG33 CG34 CG35 CG36 CG37 CG38 CG39 CG40 Cable Range Min 1/2" .150 1/2" .250 1/2" .350 1/2" .450 1/2" .560 3/4" .150 3/4" .250 3/4" .350 3/4" .450 3/4" B .560 3/4" .650 3/4" .750 1" .450 1" .560 1" .650 1" .
AMERICAN FITTINGS ® SPECTRUM Cord Grip Connectors 90° 1/2 - 1” Since 1946 AMFICO SPEC-grade 90° Cord Grip Connectors TM Materials: Compression Nuts Alloy Steel Fitting Body MI Furnished with Steel Locknut and Color Coded Sealing Washer Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) Spectrum Conne
AMERICAN FITTINGS ® SPECTRUM Cord Grip Connectors 45° 1/2 - 1” Since 1946 AMFICO SPEC-grade 45° Cord Grip Connectors TM Spectrum Connectors Include Locknut & Sealing Washer A1 B C HEX A2 Materials: Compression Nuts Alloy Steel Fitting Body MI Furnished with Steel Locknut and Color Coded Sealing Washer Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 E96445 Class
AMERICAN FITTINGS ® AP SPEC Industrial Grade Cord Grip Connectors Straight 3/8” - 3/4” Since 1946 Fit, Form and Functionality with Appleton Cord Grip Range AMFICO AP SPEC Cord Grip Connectors TM Materials: Alloy Steel with Zinc Plating Chromate Finish Aluminum * Add AL to Suffix of Cat # Stainless Steel ** Consult Factory for Availability C HEX Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2
AMERICAN FITTINGS ® AP SPEC Industrial Grade Cord Grip Connectors Straight 1”- 2” Since 1946 Fit, Form and Functionality with Appleton Cord Grip Range AMFICO AP SPEC Cord Grip Connectors TM Materials: Alloy Steel with Zinc Plating Chromate Finish Aluminum * Add AL to Suffix of Cat # Stainless Steel ** Consult Factory for Availability C HEX Compliances: Certified Made in the USA UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Clas
AMERICAN FITTINGS ® Service Entrance WaterTIGHT Cord Connectors Straight 1/2 - 3/4” for Underground Feeder Cable TYPE UF Since 1946 AMFICO SPEC-grade UF Cable Connector TM Materials: Alloy Steel with Zinc Plating Chromate Finish Neoprene Grommet C HEX Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 A E123511 Allows you to connect an underground feeder (UF) cable to an electrical box or enclosure.
AMERICAN FITTINGS ® Liquid Tight Parking Deck Fittings Since 1946 Perfect for parking decks, our industrial spec-grade connector is the RIGHT CHOICE for PVC Jacketed MC or Teck cable. SPEC-teck Alloy Steel MC Connectors One Connector Accomodates a Wide Range of Cable Sizes Application: Connector provides a unique liquid tight connection for PVC Jacketed MC Cable. No tools required to Install connector, simply terminate cable according to wiring instructions and snap it into place.
AMERICAN FITTINGS ® Non-Metallic Nylon Watertight Cord Connectors Straight 1/2 - 1” Industrial Grade Since 1946 AMFICO SPEC-grade Non-Metallic Cord Connectors TM Materials: Body: Nylon Polyamide Type 6/6 Industrial Grey Cable Grommet: Oil Resistan Neoprene Locknut & Sealing Washer Option * Compliances: Certified Made in the USA UL Standard 514B CUL to CSA Standard C22.2 No.
AMERICAN FITTINGS ® Industrial Grade Wide Range Strain Relief Grips 1/2” - 2 1/2” Since 1946 AMFICO SPEC-grade Wide Range Strain Relief TM Materials: Fitting Body and Nut: Aluminum Wire Mesh: Galvanized Steel Locknut: Galvanized Steel Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 NPT Threads A C E96445 AMFICO SR-series has a male N.P.T. tapered thread and locknut Industrial grade steel locknut allows easy attachment to enclosures up to 3/8 Inch thick.
® AMFICO Cord Grip Connectors Selection Guide Simplify your options for AMFICO Cord Connectors using the following pages. Select Your Trade Size / Knockout Size Select Cable Range Min. to Max.
® Cable Trade Range (OD) Size “ 1/2 Min.150-Max.222 1/2 Min.150-Max.222 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.150-Max.250 1/2 Min.187-Max.312 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.350 1/2 Min.250-Max.
® Trade Size “ 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Cable Range (OD) Min.125-Max.250 Min.150-Max.222 Min.150-Max.222 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.250 Min.150-Max.
® Trade Size “ 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Cable Range (OD) Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.650-Max.750 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.
® Trade Size “ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Cable Range (OD) Min.375-Max.500 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.560 Min.450-Max.650 Min.500-Max.625 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.560-Max.650 Min.
® AMFICO Cord Grip Connectors Selection Chart by Trade Size / Cord Range Trade Size “ 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 Cable Range (OD) Min.750-Max.850 Min.750-Max.850 Min.750-Max.850 Min.750-Max.875 Min.850-Max.950 Min.850-Max.950 Min.850-Max.950 Min.875-Max1.000 Min.950-Max1.050 Min.950-Max1.050 Min.950-Max1.050 Min1.000-Max1.125 Min1.050-Max1.150 Min1.050-Max1.150 Min1.050-Max1.150 Min1.
AMERICAN FITTINGS ® Cord Connector Catalog Number Index Cat # CG1 CG2 CG3 CG4 CG5 CG6 CG7 CG8 CG9 CG10 CG11 CG12 CG13 CG14 CG15 CG16 CG17 CG18 CG19 CG20 CG21 CG22 CG23 CG24 CG25 CG26 CG27 CG28 CG145 CG245 CG345 CG445 CG545 CG645 CG745 CG845 CG945 CG1045 CG1145 CG1245 CG1345 CG1445 CG1545 CG1645 CG1745 CG1845 CG190 CG290 CG390 CG490 CG590 CG690 CG790 CG890 CG990 CG1090 CG1190 CG1290 CG1390 CG1490 CG1590 CG1690 CG1790 CG1890 CG50A250 CG50A350 CG50A450 CG50A560 CG50A650 CG75A250 CG75A350 Trade Size “ 1/2 1/
AMERICAN FITTINGS ® Cord Connector Catalog Number Index Cat # Trade Size “ Product Description Since 1946 Std. Qty. CG75A450 3/4 Straight Industrial Cord Grip Connectors Min .350- Max .450 Blue CG75A560 3/4 Straight Industrial Cord Grip Connectors Min .450- Max .560 Green CG75A650 3/4 Straight Industrial Cord Grip Connectors Min .560- Max .650 Brown CG75B750 3/4 Straight Industrial Cord Grip Connectors Min .650- Max .750 Yellow CG75B850 3/4 Straight Industrial Cord Grip Connectors Min .750- Max .
AMERICAN FITTINGS ® Cord Connector Catalog Number Index Cat # Trade Size “ Product Description Since 1946 Std. Qty. CG50A45090 1/2 90 ° Industrial Cord Grip Connectors Min .350- Max .450 Blue 10 CG50A56090 1/2 90 ° Industrial Cord Grip Connectors Min .450- Max .560 Green 10 CG50A65090 1/2 90 ° Industrial Cord Grip Connectors Min .560- Max .650 Brown 10 CG75A25090 3/4 90 ° Industrial Cord Grip Connectors Min .150- Max .250 Red 5 CG75A35090 3/4 90 ° Industrial Cord Grip Connectors Min .250- Max .
AMERICAN FITTINGS ® Cord Connector Catalog Number Index Cat # Trade Size “ Product Description Since 1946 Std. Qty. Master Wt/c Qty. CG75A250GT 3/4 Straight Strain Relief Connectors With Mesh Min .150- Max .250 Red 5 CG75A350GT 3/4 Straight Strain Relief Connectors With Mesh Min .250- Max .350 White 5 CG75A450GT 3/4 Straight Strain Relief Connectors With Mesh Min .350- Max .450 Blue 5 CG75A560GT 3/4 Straight Strain Relief Connectors With Mesh Min .450- Max .
EMT Electrical Fittings Specification Grade Alloy Steel Made in the USA 1/2”- 4” Connectors & Couplings Set Screw & Compression RainTIGHT Fittings Insulated Throats Adapters to Convert EMT to Rigid or Flex Ground Bushings Supports, Straps, Hangers Time to Think Beyond Government Projects! The Perfect EMT Fitting to Decrease Your Labor Costs and Improve Your Installations Energy Projects, Data Centers, Hospitals, Infrastructure, & Industrial Facilities Trust One Name, AMERICAN Products Guaranteed for
® AMFICO EMT Steel Fittings Save Time & Reduce Costs Since 1946 AMFICO Quality Inspected During Each Manufacturing Process Provides You With the BEST Fitting Made in the World 1/2” through 4” Set Screw Couplings Set Screw Connectors Compression Couplings Compression Connectors Combo Couplings EMT to Rigid, Liquid Tight, FMC RainTIGHT Fittings Feature AMFICO Proprietary Internal Environmental Sealing Ring Full Torque No Problem with Our EZ Torque™ Compression Nuts Corrosion Resistant Alloy Steel is In
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA Connectors & Couplings Compression UL Rated Concrete Tight When Taped Size Range: 1/2” - 4” Alloy Steel EC Series Connectors & Couplings Compression UL Rated Concrete Tight When Taped Rain Tight Available See EC RT Series Connectors Furnished with: Industrial Grade Steel Locknut Furnished Since 1946 Available: Solid Alloy Steel Construction, Precision Machined EC Series: Compression Feature: AMFICO EZTorque Compression Nut Zinc Plated, Chromat
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA Connectors & Couplings Compression Since 1946 EMT AMFICO SPEC-grade Connectors & Couplings Compression TM C HEX C HEX B B A A 1/2 the Size and Weight of All Die Cast, Maileable Iron or Off Shore Steel Fittings, TWICE the Strength & Corrosion Reistance DIMENSION TABLE Connectors Couplings Cat# Trade Size “A” “B” “C” Wt./c Cat# Trade Size “A” “B” “C” Wt.
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA Couplings & Connectors Set Screw Size Range: 1/2” - 4” Alloy Steel SS Series Connectors & Couplings Set Screw Connectors Furnished with: Industrial Grade Locknut UL Rated Concrete Tight When Taped Vibration Resistant Steel Steel Screws Since 1946 Available: Solid Alloy Steel Construction, Precision Machined 1/2”- 2” 1 Screw per end; 2 1/2”- 4” 2 Screws Per End Zinc Plated, Chromate Finish - Colors available Insulated Throat Bushing Option Avai
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA Connectors & Couplings Set Screw Since 1946 EMT AMFICO SPEC-grade Connectors & Couplings Compression TM C HEX C HEX B B 2 1/2” & Larger areFurnished with 2 Set Hex Screws Per End A A 1/2 the Size and Weight of All Die Cast, Maileable Iron or Off Shore Steel Fittings, TWICE the Strength & Corrosion Reistance DIMENSION TABLE Connectors Couplings Cat# Trade Size “A” “B” “C” Wt./c Cat# Trade Size “A” “B” “C” Wt.
AMERICAN FITTINGS ® EMT Rain Tight Fittings Alloy Steel Made in the USA Couplings & Connectors Compression Size Range: 1/2” - 4” Alloy Steel EC RT Series UL Listed Rain Tight & Concrete Tight** Connectors Furnished with: Industrial Grade Locknut and Industrial Sealing Washer **UL Rated Concrete Tight When Taped Since 1946 Available: Solid Alloy Steel Construction, Precision Machined EC RT Series Compression Feature: EZTorque Compression Nut Zinc Plated, Chromate Finish Nuts Colored: Gold Insulated Throa
AMERICAN FITTINGS ® EMT RainTIGHT Fittings Alloy Steel Made in the USA Connectors & Couplings Compression Since 1946 EMT AMFICO SPEC-grade RainTIGHTConnectors & Couplings Compression TM C C HEX HEX B B A A 1/2 the Size and Weight of All Die Cast, Maileable Iron or Off Shore Steel Fittings, TWICE the Strength & Corrosion Reistance DIMENSION TABLE Connectors Trade Size “A” “B” “C” Wt./c Cat# Trade Size “A” “B” “C” Wt.
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA EMT to Liquid Tight Combination Couplings Since 1946 Available: Precision Machined Alloy Steel Construction Zinc Plated, Chromate Finish Galvanized Plating Option Available Liquid Tight End Features AMFICO’s Uniquely Designed XL Ferrule for Positive Ground and Lock Size Range: 1/2” - 2”* Alloy Steel EMT to Liquid Tight Combination Coupling Covert your EMT to liquid tight conduit with this compression coupling.
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA EMT to Rigid Combination Couplings Size Range: 1/2” - 2”* Alloy Steel EMT to Rigid Conduit Combination Coupling Since 1946 Available: Solid Alloy Steel Construction, Precision Machined ETR Series: EMT Compression - Rigid End Threaded Zinc Plated, Chromate Finish ETR RT Series UL Listed for Rain Tight ** Covert your EMT to Rigid or IMC conduit with this compression coupling. EMT compression coupling 1 end, Rigid compression coupling other end.
AMERICAN AMERICANFITTINGS FITTINGS ® ® EMT EMTFittings FittingsAlloy Including Steel Rain MadeTight in the USA EMT Couplings to FMC&Combination Connectors Couplings Since Since1946 1946 SPEC FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to EMT Made in the USA ™ Connector System Solid Steel Fully Machined SPECflex™ Connector with AMFICO Industrial EMT Set Screw Fitting Fittings are Solid Steel Zinc Plated Patent Pending Uniquely Engineered for Industrial Projects
AMERICAN FITTINGS ® EMT Fittings Alloy Steel Made in the USA EMT to FMC Combination Couplings Size Range: 1/2” - 2”* Alloy Steel FLX Series Combiation Couplings Set Screw & Compression EMT Connector Includes Industrial Sealing Washer & Steel Locknut Since 1946 Available: Zinc Plated, Galvanized Plating Insulated Throat Bushing& Steel Locknut Furnished on Flex Connector EMT to FMC Combination Couplings AMFICO SPEC-grade Set Screw or Compression TM Cat # Trade Size “ Description Box Qty. Carton Qty.
AMERICAN FITTINGS ® EMT Bushings Alloy Steel Made in the USA Ground & Bonding Bushings Set Screw Size Range: 1/2” - 4” Alloy Steel GB Series Set Screw Bushings For Use with EMT Threadless Conduit 3 Set Screws or 2 Set Screws with Lug Option Since 1946 Available: Used with a locknut to terminate threadless EMT Aluminum Layin Grounding Lug Copper Lug Option Insulator Throat Bushing Prevents Damage to Wire Insulated Throat Bushing is UL and 150° Rated RCB Series - no ground GB Series Furnished with Layin
AMERICAN FITTINGS ® LOCKnuts Alloy Steel Made in the USA Industrial Grade Bonding Locknuts Since 1946 Available: LOCK nuts Zinc Plated, Chromate Finish Galvanized Plating Option Available Uniquely Designed for Positive Ground and Lock Size Range: 1/2”- 4” Alloy Steel HDI Series SPECgrade Bonding LOCKnuts Precisioned Machined from Alloy Bar Stock Fully Torque, It Will NEVER Crack Nor Deform Made in the USA A B Diamond Beveled Face Grips Enclosure for Assured Bonding & Locking With VIBRATION PROOF Pef
When It Comes Your Electrical Fittings, Trust One Name, AMERICAN.
® Rigid Conduit Fittings Proudly Made in the USA Since 1946 RETHINK AMERICAN Thought of as a fittings source for Buy America jobs, you should realize our full range of industrial fittings go WELL BEYOND government work. Infrastructure to food processing, being much easier to install and always surpassing application requirements, our fittings will outperform ALL others, as will our commitment to customer service.
AMERICAN FITTINGS ® Rigid Conduit Fittings - Connectors Since 1946 Size Range: 1/2” - 4” Alloy Steel Connectors NT and SNT Series Compression and Set Screw For Both Rigid and IMC Conduit NT UL Listed Raintight** and Concrete Tight SNT Concrete Tight When Taped Includes Industrial Sealing Washer and Steel Locknut Available: NT Series: Compression EZTorque Compression Nut SNT Series: Steel Set Screw Insulated Throat Bushing Option Available * RainTight Option Available ** Zinc Plated, Galvanized Plating O
AMERICAN FITTINGS ® Rigid Conduit Fittings - Couplings Since 1946 Size Range: 1/2” - 4” Alloy Steel Couplings NT and SNT Series Compression and Set Screw For Both Rigid and IMC Conduit NT UL Listed Raintight* and Concrete Tight SNT Concrete Tight When Taped Includes Industrial Sealing Washer and Steel Locknut Available: NT Series: Compression EZTorque Compression Nut SNT Series: Steel Set Screw RainTight Option Available * Zinc Plated, Galvanized Plating Option Available** NT Series Compression SNT Se
AMERICAN FITTINGS ® Rigid Conduit RainTight Fittings Since 1946 Size Range: 1/2” - 4” Alloy Steel NTRT Series UL Listed RainTight & Concrete Tight For Both Rigid & IMC Conduit Connector Includes Industrial Sealing Washer & Steel Locknut Available: NTRT Series: Compression EZTorque Compression Nut Features Gold Color Nuts for Inspection Identification Zinc Plated, Galvanized Plating Option Available ** Insulated Throat Bushing Option Available on Connector* Standard RainTIGHT Enhancement Gold Toned Pla
AMERICAN FITTINGS ® Rigid Conduit Ground Bushings Since 1946 Size Range: 1/2” - 4” Alloy Steel GB Series: Ground Bushings For Both Rigid and IMC Conduit Furnished with Insulated Throat Bushing Rated 150ºc Standard Includes Dual Rated Aluminum Lay-In Ground Lug Available: Threaded and Threadless (NT Series) with Set Screws 1/2 - 2” 1 Set Screw; 2 1/2”- 4” 2 Set Screws Furnished with 3 Pre-Drilled Holes to Orientate Lug Zinc Plated, Galvanized Plating Option Available Copper (CU) Layin Lug Option Availab
AMERICAN FITTINGS ® Rigid Conduit Ground Bushings Since 1946 Size Range: 1/2” - 4” Alloy Steel GB Series: Ground Bushings For Both Rigid and IMC Conduit Standard Product Includes: 3 Set Screw Holes including 1 or 2 steel set screws Insulated Throat Bushing Rated 150º Dual Rated Aluminum Layin Ground Lug Copper Lug Option * Zinc Plated - Galvanized Plating Option Available ** TM Catalog Numbers for AMFICO SPEC-grade Alloy Steel Ground Bushings Cat # Trade Size GB 50BGL GB 75BGL GB 75BGL0 GB100BGL GB10
AMERICAN FITTINGS ® Rigid Conduit Bushings Since 1946 Size Range: 1/2” - 4” Alloy Steel RCB Series: Rigid Conduit Bushings For Both Rigid and IMC Conduit Available: Threaded and Threadless (NT suffix shown) Furnished with 3 Pre-Drilled Holes and 2 Set Screws Zinc Plated, Galvanized Plating Option Available* Consult Factory for Aluminum Furnished With 3 Set Screw Holes including 2 steel set screws Furnished with Insulated Throat Bushing Rated 150ºc For Grounding Lug Option see our GB Series catalog pa
AMERICAN FITTINGS ® Rigid Conduit 3 Piece Couplings Since 1946 Size Range: 1/2” - 4” Alloy Steel ER Series Erickson 3 Piece Couplings Rain Tight For Both Rigid and IMC Conduit UL Listed RainTight and Concrete Tight Engineered to Lock Tight and Right Features: ER Series: EZTorque Compression Nuts Precision Machined Solid Alloy Steel RainTight Construction Zinc Plated, Galvanized Plating Option Available * 3-Piece Couplings Are Used To: Join 2 lengths of threaded conduit; the coupling couples conduit whe
AMERICAN FITTINGS ® Rigid Conduit Fittings - Adapter Enlargement Fitting, Alloy Steel , Made in the USA Size Range: 1/2” to 1 1-/4”* Alloy Steel * Rigid Series UL Listed Zinc Plated with Chromate Finish *** For Both Rigid & IMC Conduit Threaded Conduit Featuring: Machined from Solid Alloy Steel Bar Stock Flat Hex Surfaces for Full and EZ-Torque Fully Precisioned Machine Cut Male and Female Threads Galvanized Plating Option Available *** Since 1946 Available: AMFICO rigid conduit enlargement fittings are
AMERICAN FITTINGS ® Rigid Conduit WaterTIGHT Ground Hubs Since 1946 AMFICO WaterTIGHT Alloy Steel Ground Hubs The NEXT Generation of Myers Hubs We Re-Engineered & Redesigned It! Alloy Steel Provides TWICE the Strength of ALL Other Hubs, Our Exclusive Low Profile Takes Up Less Space Exclusive AMFICO Hex Body Configuration Provides a Flat Wrenching Surface to Achieve Full Torque Values for Watertight Integrity Fully Machined Precision Cut Alloy Steel Threads Inside Threads & External Threads are Concentr
AMERICAN FITTINGS ® Rigid Conduit WaterTIGHT Ground Hubs Since 1946 Size Range: 1/2”- 4” Alloy Steel WaterTIGHT Ground Hubs AH Series For Rigid and IMC Conduit Material: Alloy Steel - Zinc Plated - consult factory for aluminum Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150 º C Options: Galvanized Plating Option* Add Suffix “G” to cat # i.e.
AMERICAN FITTINGS Aluminum WaterTIGHT Ground Hubs Made in the USA ® Since 1946 Size Range: 1/2” to 4” Aluminum WT Ground Hubs The BEST Grounding Hub on the Planet. . . The perfect connection for pharmaceutical, petro chem & food processing, agriculture, pulp & paper, waste water treatment, power plants, alternative energy, C/I construction.
AMERICAN FITTINGS Aluminum WaterTIGHT Ground Hubs Made in the USA ® Since 1946 Size Range: 1/2” to 4” Aluminum WT Ground Hubs Copper Free Aluminum Manufactured from Solid Aluminum Bar Stock For Use with Rigid Threaded Aluminum Conduit Standard Aluminum Ground Hub with HDI Bonding LOCKnut Standard Product with Super Low Profile Hub and LOCKnut Thickness, Provides Extra Space Outside and Inside Enclosure A C HEX HDPE Gasket E Locknut Face to Box D Unique Diamond Pattern for Precise Bonding on Metal
AMERICAN FITTINGS ® Alloy Steel Reducing Bushings Ordinary Locations Since 1946 Size Range: 1/2” - 4” as shown RB Series Reducing Bushings for Both Rigid and IMC Conduit RB’s Reduce the Trade Size of a Tapped Hole or Hub Alloy Steel Construction, Zinc Plated Precision Machined Cut for Integrity of Threads NPS Suitable for Use in Heavy Duty Industrial Applications Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Certified for MIL-STD 810 Sinusoidal Vibrations Federal Standard A-A-50553
AMERICAN FITTINGS ® Alloy Steel Reducing Bushings Hazardous Locations Since 1946 Compliances: Size Range: 1/2” - 4” as shown RBH Series Hazardous Locations Reducing Bushings for Rigid Conduit RB’s Reduce the Trade Size of a Tapped Hole or Hub Alloy Steel Construction, Zinc Plated, Galvanized Plating Available Precision Machined Cut for Integrity of Threads NPT (int and ext) IL Listed Suitable for Use in Hazardous Locations Certified Made in the USA UL Listed Hazardous Locations UL 514B NEMA Standard FB
AMERICAN FITTINGS ® Aluminum Reducing Bushings Ordinary Locations Since 1946 Compliances: Size Range: 1/2” - 4” as shown RBA Series Ordinary Loc.
AMERICAN FITTINGS ® Aluminum Reducing Bushings Hazardous Locations Since 1946 Compliances: Size Range: 1/2” - 4” as shown RBH Series Hazardous Reducing Bushings for Aluminum Conduit RB’s Reduce the Trade Size of a Tapped Hole or Hub Aluminum Construction, Precision Machined Cut for Integrity of Threads NPT (int and ext) Suitable for Use in Hazardous Locations - UL Listed Certified Made in the USA UL Listed Hazardous Locations * UL 514B NEMA Standard FB1 Certified for MIL-STD 810 Sinusoidal Vibrations F
AMERICAN FITTINGS ® Rigid Conduit Fittings - Chase Nipples Since 1946 Size Range: 1/2” - 4” Alloy Steel Chase Nipples CN Series Compression and Set Screw For Both Rigid and IMC Conduit Designed to Couple Boxes / Enclosures Standard Product Furnished Without 150°c Insulated Throat Bushing Option Available Available: GB Series: Compression Precision Machined Threads Locks Tight and Right Insulated Throat Bushing Option * Zinc Plated, Galvanized Plating Option Available** Consult Factory for Aluminum TM T
AMERICAN FITTINGS ® Rigid Conduit Fittings Combination Couplings Since 1946 AMFICO Adapter Series Converts Rigid Conduit Runs Rigid Conduit Combination Couplings to Liquid Tight Fitting Available: Alloy Steel Construction Zinc Plated, Galvanized Plating Option Available* Used to make a transition from Rigid Metallic Conduit & IMC to Liquid Tight / Seal Tight Conduit. For use in wet and dry locations. Rigid available in compression and threaded.
AMERICAN FITTINGS ® Rigid Conduit Fittings - Rigid to Greenfield Adapters Since 1946 SPEC- FLEX Series Industrial Flexible Metal Conduit Adapters Size Range: 1/2” - 2” Connector System for Rigid Conduit Transitions FMC (Greenfield) to Rigid or IMC Conduit Made in the USA Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connection and Fast Disconnect No Tools Required to Install Flex Conduit Solid Steel Fully Machined SPECflex™ Con
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical Fittings Made in the USA Products Engineered and Manufactured to Meet Your Most Demanding Environments AMERICAN FITTINGS Corporation ® Manufactured in the USA Since 1946 © 2016
LiquidTIGHT Fittings ® Why Isn’t Your Seal Tight Conduit Wearing the Best? Since 1946 AMFICO’s LiquidTIGHT fittings are the finest choice for flexible conduits including Seal Tight, Anaconda and other flexible conduits. These fittings are suitable for a wide range of installations where integrity of product and protection of equipment are your primary concern.
AMERICAN FITTINGS ® Straight Liquid Tight Connectors Since 1946 Size Range: 3/8” - 4” Alloy Steel * 5” Malleable Iron Available: Straight, Grounding Lug or Wire Mesh Strain Relief With or Without Insulated Throat Zinc Plated or Galavanized Plating Option Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 UL Standards: 514B, 467 CSA Standard: C22.2 No.
AMERICAN FITTINGS ® 90° Liquid Tight Connectors Since 1946 Size Range: 3/8” - 5” Alloy Steel Compression Nut, MI Bodies Available: 90°, Grounding Lug, or Wire Mesh Strain Relief With or Without Insulated Throat Zinc Plated or Galavanized Plating Option Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 UL Standards: 514B, 467 CSA Standard: C22.2 No.
AMERICAN FITTINGS ® 45° Liquid Tight Connectors Since 1946 Size Range: 3/8” - 5” Alloy Steel Compression Nut, MI Bodies Available: 45°, Grounding Lug or Wire Mesh Strain Relief With or Without Insulated Throat Zinc Plated or Galavanized Plating Option Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 UL Standards: 514B, 467 CSA Standard: C22.2 No.
AMERICAN FITTINGS ® Liquid Tight Connectors with Wire Mesh Strain Relief Since 1946 Size Range: 3/8” - 2” Liquid Tight Connector with Stainless Steel Wire Mesh SS Strain Relief Available: Alloy Steel Construction Connector Zinc Plated Wire Mesh Stainless Steel Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 UL Standards: 514B, 467 CSA Standard: C22.2 No.
AMERICAN FITTINGS ® Non-Metallic Liquid Tight Connectors Since 1946 Size Range: 3/8” - 2” PVC Construction, For Use in Wet Locations Provides a liquid tight, dustight connection between flexible, type B nonmetallic conduit and an enclosure. Available: Straight and 90° Connectors - NPT Threads Furnished with Sealing Washer and Steel Locknut Color: Gray No disassembly required; push the conduit onto the ferrule, then tighten the domed sealing nut.
AMERICAN FITTINGS ® Liquid Tight Combination Transition Couplings Since 1946 Liquid TIGHT Conduit Combination Couplings Transition Liquid Tight Conduit to EMT or Liquid Tight to Rigid Threaded or Compression Available: Alloy Steel Construction Zinc Plated, Galvanizing Plating Option Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 UL Standards: 514B, 467 CSA Standard:
AMERICAN FITTINGS ® Liquid Tight Transition to Greenfield FMC Since 1946 SPEC- Size Range: 1/2” - 4” Liquid Tight Conduit to Greenfield FMC FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to Liquid Tight Conduit Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial Grade Liquid Tight Conduit Connector Connector System One Piece Construction Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior
AMERICAN FITTINGS ® Liquid Tight Parking Deck Fittings Since 1946 Perfect for parking decks, our industrial spec-grade connector is the RIGHT CHOICE for PVC Jacketed MC or Teck cable. SPEC-teck Alloy Steel MC Connectors Specifically Designed for Use with PVC Jacketed MC, TECK Cable, SouthWire EZ-In Mini Cable One Connector Accomodates a Wide Range of Cable Sizes Application: Connector provides a unique liquid tight connection for PVC Jacketed MC Cable.
4” A o t S ” 1/2 the U minum in de or Alu a M eel t id S l o S The Next Generation of Greenfield Connectors SPEC-flexconnectors TM Our flex System is Your Solution for Electrical Runs GUARANTEED to Save Time On Every Connection You Make.
AMERICAN FITTINGS TM Innovation, Made in the USA Corporation Made in the USA Since 1946 SPECflex Connector System ® ™ Easily Transition Greenfield into Your Electrical Runs When You Turn On with SPECflex Avoid the Issues with Inferior Die Cast Fittings Patent Pending, Uniquely Engineered for Industrial Projects and OEM Product Performance and Reliability Straight Connector 1/2” - 4” FMC to Enclosure Superior Performance for Secure Connectors and Fast Disconnect GripsTight, Grips Right on Every Conn
SPECflex FMC Connector Fittings TM AMERICAN FITTINGS ® Corporation 1/2” to 4” SPECflex ® Solid Alloy Steel Fully Machined SPECflex Connector ™ Industrial Grade Greenfield to Enclosure Connector Made in the USA Alloy Steel Zinc Electro Plated or Aluminum Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Secure Connection and Fast Disconnect No Tools Required to Install on FMC Exceeds UL Pull-Out Requirements by 300% TM Installs On Greenfield with a Few Easy Turns
Industrial SPEC-flex FMC to Enclosure 90 ˚ Conduit Adapters TM AMERICAN FITTINGS Corporation 1/2” to 2” * Made in the USA Since 1946 SPECflex ® FLEX Series Industrial Flexible Metal Conduit Connectors TM Connector System Solid Steel Fully Machined FMC SPEC-flex Connectors Made in the USA 90° Adapter Used to Connect FMC to a Box or Enclosure Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connectors and Fast Disconnect GripsTight
Industrial SPEC-flex FMC to Enclosure 45 ˚ Conduit Adapters TM AMERICAN FITTINGS Corporation 1/2” to 2” Made in the USA Since 1946 SPECflex ® TM Connector System FLEX Series Industrial Flexible Metal Conduit Connectors Solid Steel Fully Machined FMC SPEC-flex Connectors Made in the USA 45° Adapter Used to Connect FMC to a Box or Enclosure Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connectors and Fast Disconnect GripsTight, G
Industrial SPEC-flex Adapter FMC to Flexible Cord 1/2” - 2” AMERICAN FITTINGS Corporation Made in the USA Since 1946 ® SPEC Connector System FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to Flexible Non-Metallic Cord Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial Grade Flexible Cord & Cable Connector Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connection a
Industrial SPEC-flex Adapter FMC to Liquid Tight 1/2” - 2”* AMERICAN FITTINGS Corporation Made in the USA Since 1946 ® SPEC Connector System FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to Liquid Tight Conduit Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial Grade Liquid Tight Conduit Connector Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connection and Fast
Industrial SPEC-flex Adapter FMC to EMT Set Screw 1/2” - 2” * AMERICAN FITTINGS Corporation Made in the USA Since 1946 ® SPEC Connector System FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to EMT Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial EMT Set Screw Fitting Fittings are Solid Steel Zinc Plated Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connection a
Industrial SPEC-flex Adapter FMC to EMT Compression 1/2” - 2” * AMERICAN FITTINGS Corporation Made in the USA Since 1946 ® SPEC Connector System FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to EMT Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial EMT Compression Coupling Fittings are Solid Steel Zinc Plated Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior Performance for Secure Connect
Industrial SPEC-flex Adapter FMC to Rigid Conduit Set Screw 1/2” - 2” * AMERICAN FITTINGS Corporation Made in the USA Since 1946 ® SPEC Connector System FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to Rigid / IMC Conduit Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial Rigid Conduit Set Screw Fitting Fittings are Solid Steel Zinc Plated Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance Superior
Industrial SPEC-flex Adapter FMC to Rigid Conduit Compression 1/2” - 2” * AMERICAN FITTINGS Corporation Made in the USA Since 1946 ® SPEC Connector System FLEX Series Industrial Flexible Metal Conduit Adapter Transitions FMC (Greenfield) to Rigid / IMC Conduit Made in the USA Solid Steel Fully Machined SPECflex Connector with AMFICO Industrial Rigid Conduit NT Compression Fitting Fittings are Solid Steel Zinc Plated Patent Pending Uniquely Engineered for Industrial Projects and OEM Product Performance S
Industrial SPEC- grade Armored / Metal Clad FMC Steel Connector TuM AMERICAN FITTINGS Corporation ® 3/8” to 3/4” Made in the USA Since 1946 SPEC-grade FLEX Series Industrial SPEC-grade AC-MC Connectors TM TM Solid Steel Fully Machined Connectors Certified Made in the USA For Use with Armored or Flex Metal Clad Conduit Designed to GRIP Tight, GRIP Right ™ Superior Life & Performance Over Zinc Die Cast and Malleable Iron Products Unique Saddle Design Allows Industrial Strength Grip on FMC and Armore
Industrial Electrical Fittings SPECgrade Accessories Think American Conduit Protection LOCKnuts Hardware Straps Strain Reliefs Mesh Support The Perfect Compliment for Our Fittings and Your Installations AMERICAN FITTINGS Corporation ® Manufactured in the USA Since 1946 © 2017 042017.
AMERICAN FITTINGS ® Industrial SPECgrade Steel LOCKnuts Since 1946 Size Range: 1/4” - 6” A AMFICO Industrial SPEC-grade TM Steel LOCKnuts Material: Steel Construction, Electro Zinc Plated Compliances: Certified Made in the USA * UL 514B * NEMA Standard FB1 Federal Standard A-A-50553 * UL Standards: 514B, 467* RoHS Compliant “ B” Thickness AMFICO industrial grade LOCKnuts can be fully tightend, they will not deform. Uniform threads assure, they will not vibrate loose.
AMERICAN FITTINGS ® Industrial Grade HDI Series Alloy Steel Bonding LOCKnuts Since 1946 Size Range: 1/2” - 4” AMFICO Industrial SPEC-grade TM Alloy Steel Bonding LOCKnuts Material: Alloy Steel - Precision Machined from Bar Stock Electro Zinc Plated with Chromate Finish Galvanized Plating Option Available Diamond Beveled Face Grips Enclosure for Assured Bonding & Locking With VIBRATION PROOF Peformance Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Sta
AMERICAN FITTINGS ® Industrial SPECgrade Sealing LOCKnuts Since 1946 Size Range: 1/2” - 6” AMFICO Industrial SPEC-grade TM Steel Sealing LOCKnuts PVC Molded Ring Rugged Tangs for Extensive Reach & Ensured Bonding Materials: Steel, Electro Zinc Plated with PVC Molded Gasket A Superior clean threads for full torque without distortion. Sealing ring will not displace or distort from locknut when fully torqued.
AMERICAN FITTINGS ® Industrial SPECgrade Grounding LOCKnuts Since 1946 Size Range: 1/2” - 4” AMFICO Industrial SPEC-grade TM A Grounding LOCKnuts Materials: Steel Construction Electro Plated Zinc Compliances: Complies with UL 514B “ B” Thickness * E93605 LR61799 This Product Does Not Meet BAA or Buy America Requirements Solid Steel Screw for Positive Bonding and Ground to Enclosure Superior Clean Threads for Full Torque Without Distortion on Rigid Pipe Grounding LOCKnuts Dimensional Table
AMERICAN FITTINGS ® Industrial SPECgrade Steel Reducing Washers Since 1946 Size Range: 1/2” - 4” AMFICO Industrial SPEC-grade Reducing Washers TM Materials: Steel Construction Electro Zinc Plated Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 RoHS Compliant Reducing Washers Cat.
AMERICAN FITTINGS ® Industrial SPECgrade EMT Steel Straps One Hole and Two Hole Type Since 1946 AMFICO Industrial SPEC-grade EMT Straps TM Materials: Steel, Bright Electro-Zinc Plated Finish for Corrosion Resistance Compliances: Certified Made in the USA Indoor or Outdoor Use AMFICO Steel One and Two Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Oversized Bolt Holes Make Alignment of the EMT Quick and Easy. One-Hole EMT Type Cat.
AMERICAN FITTINGS ® Industrial SPECgrade Rigid Conduit Steel Straps One Hole and Two Hole Since 1946 AMFICO Industrial SPEC-grade Rigid Straps TM Materials: Steel, Bright Electro-Zinc Plated Finish for Corrosion Resistance Compliances: Certified Made in the USA Indoor or Outdoor Use AMFICO Steel One and Two Hole Straps Snap On toRigid Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Oversized Bolt Holes Make Alignment of the Rigid Conduit Quick and Easy.
AMERICAN FITTINGS ® Industrial SPECgrade Bolted Hangers for EMT & Rigid Conduit Since 1946 AMFICO Industrial SPEC-grade EMT & Rigid Hangers TM Materials: Steel, Bright Electro-Zinc Plated Finish for Corrosion Resistance Compliances: Certified Made in the USA Indoor or Outdoor Use AMFICO Steel Hangers with Bolt, Fasten and Secure EMT or Rigid Conduit to Threaded Rod, Supports or Directly to Mounting Surface. Selection Table Conduit Size Cat.
AMERICAN FITTINGS ® Industrial SPECgrade Bus Drop Cable Supports, Pulling Grips, and Safety Springs Since 1946 Bus Drop Cable Support Made in the USA Material: Galvanized Steel High Strength Mesh Bus Drop Grips support flexible cord or cable when supplying power from an overhead source. They relieve tension and absorb vibration, while fully protecting the cable Cable Range Cat. # Min. Max. Length Eye Length Mesh PJ024 19 .24 1/2” 4.25 1 2 PJ036 .25 .36 1/2” 7.00 1 2 PJ049 .
AMERICAN FITTINGS ® Industrial Grade SPECgrade Wide Range Strain Relief Grips Since 1946 Size Range: 1/2” - 2 1/2” Available with and withour Insulated Throat Bushing * AMFICO Industrial SPEC-grade TM Wide Range Strain Relief Grips Materials: Fitting Body and Nut: Aluminum Wire Mesh: Galvanized Steel Locknut: Galvanized Steel NPT Threads Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 RoHS Compliant C A B E96445 D One Piece Construction for Easy Insta
AMERICAN FITTINGS ® Industrial SPECgrade Plastic EMT Insulated Bushings Since 1946 Size Range: 1/2” - 4” EMT * AMFICO Industrial SPEC-grade TM Plastic EMT Bushings Materials: Polypropylene Impact Resistant Temperature Rated at 105˚ “B” Height Compliances: Certified Made in the USA Meets 2008 NEC Requirements for 300-15(c) Protection UL 514B NEMA Standard FB1 Federal Standard A-A-50553 RoHS Compliant AMFICO rigid plastic insulating bushings offer maximum protection for cables to avoid damaging abr
AMERICAN FITTINGS ® Industrial SPECgrade Plastic Insert Bushings Since 1946 Size Range: 1/2” - 6” Rigid / INC Conduit AMFICO Industrial SPEC-grade TM Plastic Threaded Bushings for Rigid / IMC Conduit Materials: Polypropylene Impact Resistant Temperature Rated at 105˚ Compliances: Certified Made in the USA UL 514B Meets 2008 NEC Requirements for 300-15(c) Protection NEMA Standard FB1 Federal Standard A-A-50553 RoHS Compliant A AMFICO rigid plastic insulating bushings offer maximum protection for cab
AMERICAN FITTINGS ® Industrial SPECgrade Steel Knockout Seals Since 1946 Size Range: 1/2” - 2” AMFICO Industrial SPEC-grade TM Snap In Knockout Seals Steel Materials: Steel Construction Electro Zinc Plated Locking fingers snap into trade size holes in enclosures, panels, conduit. Easy to install, cost-effective and durable, Knockout seals increase quality and safety on projects. Snaps in Place, and EZ Removal A B A B Knockout Seals Steel Cat.
AMERICAN FITTINGS ® Industrial SPECgrade Nylon Insulated Bushings Since 1946 Size Range: 1/2” - 2 1/2” AMFICO Industrial SPEC-grade TM Nylon Knockout Insulated Sealing Bushings Material: Type 6/6 Nylon Dupont Zytel Rated at 105º Flammability: UL94V-2 Finish: As Molded Color: Black Compliances: Certified Made in the USA Meets UL 514B NEMA Standard FB1 Federal Standard A-A-50553 RoHS Compliant Converts Pipe and Box Rough Edge Holes to Smooth Neat Insulated Holes.
AMERICAN AMERICAN FITTINGS Corporation SPEC-grade Industrial Electrical Fittings We Are the Perfect Connection for Agriculture Alternative Energy Data Centers Federal & State Projects Food Processing & Production Hospitals and Medical Centers Industrial Applications Infrastructure Construction Military Bases OEM Equipment Oil & Gas Projects Paper & Pulp Transportation Waste Water Treatment ® ® Innovating the Next Generation of Electrical Fittings Founded in 1946, a family owned and operated, 3rd gene