Instructions / Assembly

TOOLS NEEDED
• 5/16" open end wrench
• 3/16" Allen wrench
PARTS LIST
1 – table top
4 – legs
1 – foot plate
2 – cross piece
1 – umbrella holder
8 – 3 1/2" by 5/16" bolts
8 – 2 1/2" by 5/16" bolts
16 – 5/16" nuts
16 – 5/16" flat washers
16 – 5/16" lock washers
4 – 2" screws
TABLE
2"
SCREWS
5/16"
NUTS
3 1/2" X 5/16"
BOLTS
5/16"
FLAT WASHERS
5/16"
LOCK WASHERS
FIGURE 1
Mount foot plate to legs. Insert
2 1/2" bolt through bracket in
foot plate through legs.
2 1/2"
FIGURE 1-A
Add flat washer, lock washer and
5/16" nuts to back side of seat
back and seat. Tighten thoroughly.
FLAT WASHER
NUT
LOCK WASHER
2 1/2"
Assembly Instructions
2 1/2" X 5/16"
BOLTS
FIGURE 3
Mount center cross piece. Insert
3 1/2" bolt through cross piece
(through leg.)
FIGURE 4
Set table top onto legs. Insert
2 1/2" bolts through holes.
FIGURE 2
Fasten umbrella holder to cross
piece with 4 screws as shown.
NOTE:
1 PC.
ABOVE &
1 BELOW
2 1/2"
2 1/2"
2" SCREWS
3 1/2"
3 1/2"
2 1/2"
2 1/2"