Owner's Manual

1. Using a utility knife, cut out shaft

supports in mounting bracket to

create a DIN receiver opening

(Figure 1).

2. If installing an equalizer: Cut out EQ

opening supports as shown (Figure 2).

If not installing an equalizer: snap EQ

cover plate into lower opening in

bracket.

3. Install mounting bracket and receiver in

vehicle following instructions in the

Mastersheet for your particular vehicle.

IMPORTANT

Installation Kit

Tools Required

003 GMK408

Before starting, compare items on your invoice with items

received. If any parts are missing, first carefully check through

packaging material. If an item is missing, please call:

▲

Parts

Supplied:

▲

Mounting

Bracket

Cover Plate

Geo

Revision 06/16/99

Utility Knife

DIN Kit Preparation

Mounting Bracket

Important: Follow these instructions only if installing

a DIN receiver. If installing a shaft receiver, follow

instructions on the next page.

EQ Cover Plate

Shaft Supports

EQ Opening Supports

FIGURE 1

FIGURE 2

(generic drawing)

Trimplate

(shaft receivers only)

Crutchfield at 1-888-955-6000

PAGE 1
Installation Kit 003 GMK408 IMPORTANT Before starting, compare items on your invoice with items received. If any parts are missing, first carefully check through packaging material. If an item is missing, please call: Geo Crutchfield at 1-888-955-6000 Revision 06/16/99 Important: Follow these instructions only if installing a DIN receiver. If installing a shaft receiver, follow instructions on the next page. Mounting Bracket DIN Kit Preparation 1.
PAGE 2
Installation Kit 003 GMK408 IMPORTANT Before starting, compare items on your invoice with items received. If any parts are missing, first carefully check through packaging material. If an item is missing, please call: Geo Crutchfield at 1-888-955-6000 Shaft Assembly 1. If installing an equalizer: Use a utility knife to cut out EQ opening supports as shown (Figure 1). If not installing an equalizer: Snap EQ cover plate into lower opening in mounting bracket. Receiver Mounting Bracket 2.