American International Car Stereo Installation Kits &Accessories .... ·~ en c:: c:: .... ·- = :E -i; ,..iii ,... Q en a; = a. VEHICLE APPLICATION POISChe 2005-11 Porsche 911 2005-11 Porsche Boxster 2005-11 Porsche Cayman ©2014 AME_RICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 11/14 PRINT Ver.
DASH DISASSEMBLY INSTRUCTIONS 1. 2. 3. 4. 5. 6. Remove (1) T-25 screw from each lower rear carpet panel, located to the left and right of the radio. Remove (2) T-20 screws from each of the now exposed rear bottom side radio trim. Unsnap and remove radio side trim pieces from the left and right of the radio. Remove/Loosen ( 1) 7mm bolt from the right side of the radio. Turn the (4) 5mm female Allen/Hex head screws counter clockwise, until they stop. Remove radio. Unplug all harnesses.
DOUBLE DIN INSTALLATION INSTRUCTIONS This is a pressure fit kit, there are no screw or bolt mo~nting locations. Install kit carefully. 1. 2. 3. 4. Attach ISO brackets to the rear of the main mounting kit. Slide radio into kit from rear & attach to ISO mounting brackets using the (8) counter sunk screws supplied with kit (do not tighten screws at this time). Slide radio forward or backward for your desired look and then tighten the mounting screws. When installing the kit/radio into the dash opening ...
For information about other American International automotive accessories visit our website at: hnp://www.aius.net 2500 East Francis Street Ontario, CA 91761, U.S.A.
MOUNTING KIT POR911B 200S·2011 BLACK RADIO PORSCHE 911/ CAYMAN I BOXSTER SINGLE ISO w/POCKET or DOUBLE DIN Qllll, 23 3 11 1 II 11 6
