Owner Manual

ManualsBrandsAmerican Legend Manuals7 Foot Pool TablesHampton 7'3 in 1 Pool, Dining, and Table Tennis Table

1-888-996-2729

FAX: 1-866-873-3531

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE ,

please contact us toll free @:

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Your Model Number ______________________

G05302W/F

have your model number when inquiring about parts.

pooltables@escaladesports.com

Please

Date Code ____________________ 2-45-G05302W/F- -FS

2018 Escalade Sports

For Customer Service Call 1-888-996-2729

When contacting Escalade Sports please provide your model number, date

code (if applicable) and part number if requesting a replacement part. These

numbers are located on the product, packaging, and this owners manual.

Purchase Date ________________________

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Summary of content (12 pages)

PAGE 1
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE, please contact us toll free @: 1-888-996-2729 FAX: 1-866-873-3531 pooltables@escaladesports.com Or write to: Escalade Sports Customer Service Department P.O. Box 889 Evansville IN 47706 Please have your model number when inquiring about parts.
PAGE 2
IMPORTANT! READ EACH STEP IN THIS MANUAL BEFORE YOU BEGIN THE ASSSEMBLY. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS 3 IN 1 BILLIARD, TABLE TENNIS, DINING TABLE Tools Required: Allen Wrench T1 Included with the Hardware Kit Furniture Polish and Soft Cloth Needle Nose Pliers Small Ball-peen Hammer Carpenters Level An electric screwdriver is helpful in assembly.
PAGE 3
HARDWARE IDENTIFIER (To Scale) HARDWARE KIT IS PACKED INSIDE OF CARTON A H2 = 48 pcs 5/16’’ x 1-3/8’’ Allen Head Bolt H1 = 16 pcs 5/16’’ x 1-1/4’’ Allen Head Bolt H3 = 64 pcs 5/16’’x 3/4’’ Flat Washer (Not to Scale) H4 = 64 pcs 5/16’’ x 1/2’’ Lock Washer T1 = 1 pc Allen Wrench H5 = 36 pcs 1/24’’ x 3/4’’ Nail PARTS IDENTIFIER (Not To Scale) Guide Pin Holes Guide Pins P1 = 1 pc Main Table Cabinet PACKED INSIDE OF CARTON A P5 = 2 pcs Bench Seat PACKED INSIDE OF CARTON B All Rights Reserved.
PAGE 4
PARTS IDENTIFIER (Not To Scale) P8= 4 pcs Corner Pocket PACKED INSIDE OF CARTON A P9= 2 pcs Middle Side Pocket PACKED INSIDE OF CARTON A ACCESSORIES IDENTIFIER (Not To Scale) A1= 1 pc Table Tennis Net A2= 2 pcs Table Tennis Net Post A3= 2 pcs Table Tennis Paddle PACKED INSIDE OF CARTON A PACKED INSIDE OF CARTON A PACKED INSIDE OF CARTON A A5= 2 pcs Cue Chalk PACKED INSIDE OF CARTON A A9= 1 pc Pool Playfield Brush PACKED INSIDE OF CARTON A All Rights Reserved.
PAGE 5
3 IN 1 BILLIARD,TABLE TENNIS,DINING TABLE Parts List (Not To Scale) All items are packaged in larger Carton A, except, P4, P5, P7, A6, A10 and A11 are packaged in smaller Carton B. P8 NOTE: Reverse side is dining top. A1 P2 P3 A4 A3 P9 A2 A8 A10 A7 A5 A6 A9 P5 P1 P7 P4 P6 A11 All Rights Reserved.
PAGE 6
PARTS REQUIRED 1pc - P1 Main Table Cabinet 16pcs - H1 Allen Head Bolt 4pcs - P4 Table Leg 16pcs - H3 Flat Washer 16pcs - H4 Lock Washer 1pc - T1 Allen Wrench STEP 1: Attach P4 Legs onto the Side Aprons and the End Aprons using H1 Bolts, H4 Lock Washers and H3 Flat Washers as shown in FIGURE 1. Use T1 Allen Wrench to tighten all H1 bolts.
PAGE 7
PARTS REQUIRED 36pcs - H5 Nails 4pcs - P8 Corner Pocket 2pcs - P9 Middle Side Pocket STEP 2: Insert the P8 Corner Pockets into each of the corner holes. Insert the P9 Middle Side Pockets into each of the middle holes.Attach drop pockets to rails by using six H5 Nails per pocket. Hold nails with a pair of Needle Nose Pliers and tap them into the plastic pocket with a small ball peen hammer as shown in DETAIL A & FIGURE 2.
PAGE 8
PARTS REQUIRED 1pc - P2 A Table Tennis Top With Guide Pins 1pc - P3 B Table Tennis Top With Guide Pin Holes 1pc - A1 Table Tennis Net 2pcs - A2 Net Post 2pcs - A10 Table Tennis Playfield Support STEP 3: Using the guide pins carefully connect the P2 A Table Tennis Top With Guide Pins to P3 B Table Tennis Top With Guide Pin Holes as shown in DETAIL B. Place A10 Table Tennis Playfield Supports between Table Tennis Top and Billiard table.
PAGE 9
PARTS REQUIRED 48pcs - H2 Allen Head Bolt 48pcs - H3 Flat Washer 48pcs - H4 Lock Washer 4pcs - P6 Bench Leg 4pcs - P7 Bench Support 2pcs - P5 Bench Seat 2pcs - A11 Bench Carpet STEP 4: Attach P6 Bench Legs to P7 Bench Supports using H2 Allen Head Bolts, H3 Flat Washers and H4 Lock Washers as shown in FIGURE 4. Tighten all H2 Allen Head Bolts. P6 FIGURE 4 H4 Helpful Assembly Tip: Keep P7 Bench Supports flush with the edges of the P6 Bench Legs.
PAGE 10
PARTS REQUIRED 2pcs - A11 Bench Carpet STEP 6: Install the A11 Bench Carpet into each bench as shown in FIGURE 6. FIGURE 6 Keep hands and fingers clear of the hinge area and the bench lid area when closing the bench lid hinge area when folding Bench Lid. WARNING: To prevent injury, exercise caution when opening and closing the bench lid. DO NOT let bench lid drop shut. DO NOT let children operate bench lid. Be cautious when moving bench on floor, Lift bench ends to move. DO NOT STAND ON BENCH SEAT.
PAGE 11
Congratulations! You have now assembled your 3 in1 Billiard table. Please note the Care and Use instructions below to insure many years of trouble free use of your 3 in1 Billiard table. CARE AND USE OF YOUR TABLE 1. Use spray furniture polish to clean all exterior surfaces of your pool table. 2. Use the table brush provided to clean the cloth on the table. 3. Use only a slightly damp soft cloth to clean the table tennis top (do not use Furniture Polish) 4. This product is intended for INDOOR use only . 5.
PAGE 12
90 DAY LIMITED WARRANTY This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS Product (hereinafter referred as the "Product"). WARRANTY DURATION: This Product is warranted to the original owner, for a period of 90 days from the original purchase. WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original owner, this product to be free from defects in material and workmanship when used for the intended purpose under normal use and conditions.