Owner Manual

ManualsBrandsAmerican Legend Manuals7 Foot Pool TablesBrookdale 7.5' Pool Table

202 0 Escalad e Sports

Fo r Custome r Servic e Cal l 1-888-996-2729

1-888-996-2729

FAX: 1-866-873-3531

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE ,

please contact us toll free @:

Your Model Number ____________________

have your model number when inquiring about parts.

gameroom@escaladesports.com

Please

Date Code ___________________________

2 - AL3020W- - MW

When contacting Escalade Sports please provide your model number, date

code (if applicable) and part number if requesting a replacement part. These

numbers are located on the product, packaging, and this owners manual.

Purchase Date ________________________

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

AL3020W/F

Mailing Address: (Correspondence Only)

Escalade Sports

PO Box 889

Evansville, Indiana 47706-0889

Physical Location:

Escalade Sports

817 Maxwell Ave.

Evansville, Indiana 47711

Summary of content (11 pages)

PAGE 1
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, DO NOT RETURN IT TO THE STORE, please contact us toll free @: 1-888-996-2729 FAX: 1-866-873-3531 gameroom@escaladesports.com Mailing Address: (Correspondence Only) Escalade Sports PO Box 889 Evansville, Indiana 47706-0889 Physical Location: Escalade Sports 817 Maxwell Ave.
PAGE 2
IMPORTANT! READ EACH STEP IN THIS MANUAL BEFORE YOU BEGIN THE ASSEMBLY. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS 90'' BROOKDALE BILLIARD TABLE Tools Required: Allen Wrench (included) Hex Wrench (included) Furniture Polish and Soft Cloth Phillips Screw Driver Carpenters Level Assembly Tips Make sure you understand the following tips before you begin to assemble your billiard table. 1. Start all bolts by hand before tightening. 2.
PAGE 3
HARDWARE IDENTIFIER (To Scale) H1 - 5/16’’ x 1-1/2’’ Allen Head Bolt (12 pcs) H2 - 1/4’’ x 1-3/4’’ Allen Head Bolt (26 pcs) H3 - 3.5mm x 32mm Phillips Round Head Screw (16 pcs) H4- 5/16’’ Flat Washer (12 pcs) H5- 1/4’’ Flat Washer (36pcs) H6- 1/4’’ Hex Nut (10 pcs) （Not to Scale) H7 - 5/16’’ Lock Washer (12 pcs) H8 - 1/4’’ Lock Washer (26 pcs) T1 - Allen Wrench (1 pc) 3 For Customer Service Call 1-888-996-2729 （Not to Scale) T2 - Hex Wrench (1 pc) （Used on H6 Hex Nut) All Rights Reserved.
PAGE 6
PARTS REQUIRED 1pc - P1 Main Cabinet 2pcs - P8 Cabinet Support Plate with Ring 8pcs - H2 Allen Head Bolt 8pcs - H5 Flat Washer 8pcs - H8 Lock Washer STEP 1 To best protect the table, build the game table on the carton bottom tray it is packed in. Attach the P8 Cabinet Support Plates with Ring onto the P1 Main Cabinet Support Brace using the H2 Allen Head Bolts, H5 Flat Washers and H8 Lock Washers as shown in FIGURE 1. Tighten the H2 Allen Head Bolts using the T1 Allen Wrench.
PAGE 7
PARTS REQUIRED 2pcs - P4 Leg Cross Support 16pcs - H5 Flat Washer 4pcs - P7 Leg Cross Support Plate 8pcs - H6 Hex Nut 8pcs - H8 Lock Washer 8pcs - H2 Allen Head Bolt STEP 3 Align the holes on the P7 Leg Cross Support Plates with the predrilled holes on the P4 Leg Cross Support. Attach the P7 Leg Cross Support Plates onto the P4 Leg Cross Support using the H2 Allen Head Bolts, H5 Flat Washers, H8 Lock Washers , H6 Hex Nuts as shown in FIGURE 3. H8 Build second identical Assembly.
PAGE 8
PARTS REQUIRED 4pcs - H5 Flat Washer 2pcs - H6 Hex Nut 2pcs - H8 Lock Washer 2pcs - P6 Turnbuckle Support 4pcs - P9 Leg Leveler 2pcs - H2 Allen Head Bolt STEP 5 Attach the P6 Turnbuckle Supports onto the P7 Leg Cross Support Plates using H2 Allen Head Bolts, H8 Lock Washers, H5 Flat Washers and H6 Hex Nuts as shown in FIGURE 5. Tighten the H2 Allen Head Bolts using theT1 Allen Wrench. Tighten the H6 Hex Nuts using the T2 Hex Wrench.
PAGE 9
PARTS REQUIRED 16pcs - H3 Phillips Round Head Screw 2pcs - P5 Leg Panel STEP 6 Attach the P5 Leg Panels using predrilled holes and pilot holes onto the P2 Legs A and P3 Legs B using the H3 Phillips Round Head Screws as shown in FIGURE 6. P2 H3 P3 Tighten the H3 Screws using a Phillips Screwdriver. H3 DO NOT strip out the H3 Screws. P3 P5 P5 FIGURE 6 P2 H3 THIS STEP REQUIRES FOUR OR MORE ADULTS.
PAGE 10
Congratulations! You have now assembled your game table. Please note the Care and Use instructions below to insure many years of trouble free use of your game table. CARE AND USE OF YOUR TABLE 1. 2. 3. 4. 5. 6. 7. Use spray furniture polish to clean all exterior surfaces of your table. Use the table brush provided to clean the cloth on the table. This product is intended for INDOOR use only. DO NOT sit, climb or lean on the table. DO NOT drag the table when moving it. This will damage the legs.
PAGE 11
90 DAY LIMITED WARRANTY This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS Product (hereinafter referred as the "Product"). WARRANTY DURATION: This Product is warranted to the original owner, for a period of 90 days from the original purchase. WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original owner, this product to be free from defects in material and workmanship when used for the intended purpose under normal use and conditions.