Instruction Manual

Table Of Contents

PARTS REQUIRED:

FIGURE 3

8 pcs - H5 Phillips Flat Head Screw 2 pcs - P4A Left Leg

16 pcs - H6 Allen Head Bolt 2 pcs - P4B Right Leg

16 pcs - H7 Flat Washer 2 pcs - P5 Leg Cross Tube

2 pcs - P9 Wooden Ball Catcher 1 pc - A3 4mm Allen Wrench

STEP 3:

Install P9 Wooden Ball Catchers using H5 Screws as shown in FIGURE 3.

Tighten, but do not strip out H5 Screws.

Install P4A Left Legs and P4B Right Legs with P5 Leg Cross Tubes using H6 Allen Head Bolts with H7 Flat Washers

as shown in FIGURE 3. Use A3 Allen Wrench to tighten all H6 Bolts.

P4B

P4A

P4B

THIS STEP REQUIRES TWO OR MORE ADULTS.

VERY CAREFULLY TURN THE TABLE OVER AND

SET IT ON ITS LEGS.

IMPORTANT NOTE:

Install P5 Leg Cross Tubes

before tightening H6 Leg Bolts.

2014 Escalade Sports

For Customer Service Call 1-888-996-2729