Technical Specifications

HYBRID 2 Kits
Technical Information
Description
Low-profile LED Linear lighting with superb light output for
indoor and outdoor use
Features
Each kit includes: (1) 5ft removable power cord with 8A inverter
(H2-CONKIT-8A), (1) Removable end cap, and Mounting Clips (1 per
foot of length)
Parallel wiring to each LED ensures that if one LED goes out,
the rest of the cutting increment stays lit
Flexible rubber housing with clear PVC lens are protected
with UV inhibitor
Various mounting, linking, and power accessories available
(sold separately)
Mounting
Mounting clips or mounting track
Applications
Accent Lighting, Coves, Ledges, Shelves
Warranty
1 year Standard Linear
Page 1 of 2©2016 American Lighting, Inc. REV1744 www.AmericanLighting.com 11775 E. 45th Ave. Denver, CO 80239 Ph: 1-800-880-1180 Fax: 303-695-7633
120V
IndoorLinkable Outdoor
Hybrid 2 Kits
Voltage 120V AC, 60Hz
CCT Warm White (2700K) Bright White (5000K)
Length 3ft 6ft 12ft 18ft 30ft 45ft 3ft 6ft 12ft 18ft 30ft 45ft
Wattage 9W 18W 36W 54W 90W 135W 9W 18W 36W 54W 90W 135W
Lumens 145Lm/Ft 180Lm/ft
CRI 82+
Max Run 150 feet
Beam Angle 120°
Dimming 10-100% with most incandescent, low-voltage magnetic, and low-voltage electronic dimmers*
Operating Temp
-30°C (-22°F) to 45°C (113°F)**
Storage Temp
-10°C (14°F) to 30°C (86°F)**
LED Spacing Every 5/8”; 20 per foot
Rating cETLus Listed (void if cut); Indoor/Outdoor; IP65
Rated Life 30,000 Hours
*Minimum loads may apply. Per the NEC, switched wall outlets cannot be used with wall dimmers.
**Do not install in inclement whether or extreme temperature conditions (i.e. -25°C (-13°F) and below)
PROJECT:
CAT:LOCATION:
TYPE:
Dimensions
9/16”W
(14.3mm)
1/4”H
(6.35mm)
3-7/32”W
(81mm)
3-5/8”W
(82mm)
8” Lead
(203mm)
44” Tail
(1118mm)
1-1/8”Dia.
(29mm)
2-7/32”W
(57mm)
End Cap

Summary of content (2 pages)