Operator`s manual

AMERICAN-LINCOLN 1-17
7760
OPERATIONS OF CONTROLS AND GAUGES
HOURMETER
OIL PRESSURE
FUEL GAUGE
VOLTMETER
WATER TEMPERATURE
WATER
TEMP
100
170
°F
195
220
280
77
91
104
138
°C
0
1/4
1/2
FUEL BATTERY
10
12
14
16
-
+
HOURS
0
0
0
0
1
1/10
PSI
0
20
40
60
80
278
553
kPa
OIL
PRESS
P-4865 FIGURE 5
WATER TEMPERATURE GAUGE
The Water Temperature Gauge is located on the console panel above the steering wheel in the gauge cluster. The
gauge is mechanical and activated by a sender in the engine. It displays the engine coolant temperature in farenheight.
HOUR METER
The Hour Meter is located on the console panel above the steering wheel in the gauge cluster. This meter is
activated when the key switch is in the “ignition” position. The meter indicates actual “run” time of the machine. The
meter is used to indicate when maintenance should be done to the machine.
FUEL GAUGE
The Fuel Gauge is located on the console panel above the steering wheel in the gauge cluster. This gauge indicates
the level of fuel contained in the fuel tank.
OIL PRESSURE GAUGE
The Oil Pressure Gauge is located on the console panel above the steering wheel in the gauge cluster. The gauge
is mechanical and activated by a sender in the engine. It displays the engine oil pressure in PSI.
VOLT METER
The Volt Meter is located on the console panel above the steering wheel in the gauge cluster. The gauge indicates
the charging or discharging of the battery.
SCRUB BRUSHES SWITCH
The Brushes Switch is located on the console to the left of the steering wheel in the “SCRUBBING” section. This
switch in the position marked “LOWER” will lower the scrub brush deck and activate the three scrub brushes. The
Brush Rotation Switch and The Brush Pressure switch can not be activated unless this switch is in the “LOWER”
position. This switch in the “RAISE” position will stop the brushes from rotating and raise the scrub brush deck.