Specifications

FORM NO. 56041764 - SR5730 - 37
PLUG
Fig. 61
SQUEEGEE CLAMP
Fig. 60
MAINTENANCE
SQUEEGEE BLADE REPLACEMENT
Replace if front or rear blades are worn or damaged.
1. Set the parking brake.
2. Turn the key to the on position.
3. Put the Squeegee Blade Switch in the lower position.
4. Turn the key switch to the off position.
5. Remove the rear squeegee assembly.
6. Loosen the strap clamp.
7. Remove the old blades.
Push the new blades in until they are against the top of the squeegee. Retighten
clamp
TO DRAIN SOLUTION TANK
Remove the cover from the solution tank, rotate the handle on the drain plug
counterclockwise and then pull up as shown in fi gure 61. After the tank has drained,
fl ush out with clean water and reinstall the plug.
PRE SWEEP (OPTION)
Main Broom Belt
1. Check belt tension adjustment as shown in fi gure 62.
2. Loosen idler pulley as shown in fi gure 63.
3. Move in slot in main frame.
4. Retighten.
SIDE BROOM BELT
1. Check belt tension adjustment as shown in fi gure 64.
2. Loosen pulley and broom nut.
3. Force pulley and broom forward.
4. Retighten.
MAIL BROOM BELT
Fig. 62
LOOSEN NUT
TO ADJUST BELT
IDLER PULLEY
TO TIGHTEN BELT
PUSH DOWN
Fig. 63
LOOSEN NUT
TO ADJUST BELT
SIDE BROOM BELT
PULL FORWARD TO TIGHTEN BELT
Fig. 64