User`s manual

40 CPC-2347 User's Manual
Boot Up NumLock Status
The default is On.
On Keypad boots up to number keys.
Off Keypad boots up to arrow keys.
Gate A20 Option
Normal: The A20 signal is controlled by the keyboard controller or
chipset hardware.
Fast (Default): The A20 signal is controlled by Port 92 or the
chipset specific method.
Typematic Rate Setting
The typematic rate determines the characters per second accepted
by the computer. The Typematic Rate setting enables or disables
the typematic rate.
Typematic Rate (Chars/Sec)
BIOS fixes the following input values (characters/second) for
typematic rate: 6.
Typematic Delay (msec)
Typematic delay is the time interval between the appearance of the
first and second characters, when holding down a key. The input
value is: 250 (msec).
Security Option
This setting determines whether the system will boot up if the
password is denied. Access to Setup is, however, always limited.
System: The system will not boot, and access to Setup will be
denied if the correct password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.