User guide
disk, and then press <SPACE> to select a Recovery disk. A small triangle
marks the selected drive. Press <Enter> after completing your selection.
Sync
item is selected, use the up/down arrow keys to select a sync
option that you want and press <Enter>.
Create Volume
item is selected, press <Enter>. The following
warning message appears.
go back to the
CREATE VOLUME
menu.
If a recovery set is created, you cannot add more RAID sets even when you
have more non-RAID disks installed in your system.
RAID Level
item is selected, press the up/down arrow keys to
select
Recovery
, and then press <Enter>.
Disks
item is selected, press <Enter> to select the hard disk drives
you want to include in the recovery set. The
SELECT DISKS
screen appears.
[[
↑↓