User guide
7-7
3. Select using the <Tab> key when asked if you have the driver disk, then
press <Enter>.
No
®
select OK, then press <Enter>.
The drivers for the RAID card are installed to the system.
Red Hat
®
Enterprise Linux OS 5.6
To install the LSI MegaRAID controller driver when installing Red Hat
®
Enterprise
OS:
®
OS installation CD.
, type , then
press <Enter>.
The number of ata varies with the hard disk drive number you have when
building a RAID set. For example, if you want to build a RAID set with 6 hard
disk drives, type command line:
linux dd noprobe=ata1 noprobe=ata2
noprobe=ata3 noprobe=ata4 noprobe=ata5 noprobe=ata6
.