User guide
3. Take note of the drive tray holes.
dif
ferent types of hard disk drives.
Use two screws on each side to
secure the hard disk drive.
on the tray, then secure it with four
screws.
2.4 Hard disk drives
The system supports eight hot-swap SATAII/SAS hard disk drives. The hard disk
drive installed on the drive tray connects to the motherboard SATAII/SAS ports via
the SATAII/SAS backplane.
To install a hot-swap SATAII/SAS HDD:
1. Release a drive tray by pushing the
spring lock to the right, then pulling
the tray lever outward. The drive
tray ejects slightly after you pull out
the lever.
the drive tray out of the bay.
spring lock