User`s guide

Chapter Four : Using Your MegaRAC G3
95
Firewall, Continued
Once you left click the Add button on either the Blocked Sites or Trusted Sites, the
following dialog box opens.
Item Description
Start IP Address This field allows you to enter the start address of the subnet you want to either block or
always allow.
Subnet Mask This field allows you to enter the specific subnet of the IP address range that you want to
use.
Protocol This drop down box allows you select either the UDP protocol or TCP protocol. The
MegaRAC G3 can be configured to accept or ignore packets based on the type of packet.
All Ports This setting allows the MegaRAC G3 to accept or ignore ports 1 through 65535.
Ports Range This setting allows you to select the specific range of ports that you want the MegaRAC G3
to accept or ignore.
Starting Port This field allows you to enter the first port of the port range that you want the MegaRAC
G3 to accept or ignore.
Ending Port This field allows you to enter the last port of the port range that you want the MegaRAC
G3 to accept or ignore.
OK button Left click the OK button when you are satisfied with the information entered.
Cancel button Left click the Cancel button to discard changes and exit.
Note: You can edit any of the IP address ranges by selecting the IP address range from the main
Firewall Dialog Window. You can enter your adjustments and left clicking on the Modify
button for the changes to take effect.