User`s guide

Chapter One : Introduction
1
Chapter 1 Introduction
Features
Feature Description
Key Feature
100% out-of-band
100% operating system independent
Soft Processor
provides out-of-band connectivity
plugs into a mission critical server
half-sized PCI form factor plugs into any PCI slot
Remote Client
industry standard Internet browser (any JavaScript 1.2 capable)
manage the server from anywhere in the world
SSL v3 for secure connection
Processor System On Chip
(SOC)
32-Bit 266 MHz ~ 400 MIPS MMU
16 K I-cache
16 K D-cache
Memory
32 megabyte PC-133 MHz SDRAM standard (soldered on PCB, you cannot
upgrade or remove)
Flash
16 bit, 16 megabyte flash ROM (soldered on PCB, you cannot upgrade or
remove)
Ethernet LAN
integrated SOC 10/100 MAC
external level one 10/100 BASE-TX Ethernet
On-Board Modem + DAA
(Optional)
56K socket modem (not designed to support Console Redirection)
Note: As of March 15
th
, 2004, the MegaRAC G3 firmware does not support the
optional modem.
I2C Controller Hardware
Monitor (OEM version
feature)
ambient temperature monitoring
PCI voltages monitoring
card internal voltages monitoring
battery voltage monitoring
RTC
external RTC for time stamp of events
Power Supply switching logic between optional 6 V wall adapter, 5 V PCI, 3.3 V PCI, and optional
on-board battery
Battery Backup (Optional) 900 mAh LION battery provides 30 minutes of battery backup in case of host system
or optional wall adapter power failure
Form Factor
half-size standard PCI card
Environmental
Specifications
storage temperature: -20 degrees to 80 degrees C
relative humidity: 5 to 80 percent non-condensing @ 40 degrees
operating temperature: 0 to 45 degrees C
vibration: 2.5G acceleration over 2000 Hz sine wave, 2oct/mian sine sweep
shock: 20G; 11 msec duration, half-sine shock sweep
Monitoring
IPMI 1.5 compliant (OEM version feature)
I2C sensors (OEM version feature)
SDR and Soft Processor (SP) file support for easy customization (OEM version
feature)
OEM specific
Cont’d