User`s guide

Appendix B : G3ConfigApp
117
Appendix B G3ConfigApp
Overview
The MegaRAC G3 card is normally configured through the Internet browser-based
Remote Access Companion for MegaRAC G3. You can also configure your MegaRAC
G3 card through the G3ConfigApp utility. The G3ConfigApp utility is a GUI-based
program that runs in Microsoft Windows.
G3ConfigApp
Step Description
1 The G3ConfigApp program allows you to configure the MegaRAC G3 card. You can run the
G3ConfigApp program from the host system or from a client system. The client system is the system that
will connect to the MegaRAC G3 card remotely through the network. This is basically WinCuri with a
GUI.
To run the G3ConfigApp program, double left click the G3ConfigApp.exe icon located in either of
the following directories on your MegaRAC G3 CD:
• CDROM\RemoteTools\Win32\
• CDROM\ServerAgent\Win32\
2 The following window appears:
If you are running the G3ConfigApp program from the host system, select the first radial button labeled
‘I am on the server which has a G3 plugged in’ and left click on the Ok button.
Note: Make sure that the
MegaRAC G3 card is connected to the host system’s motherboard through
the USB cable.
Cont’d