User`s guide

Appendix C : MegaRAC G3 Remote Recovery Application (RRA)

127

MegaRAC G3 Card Remote Recovery Application (RRA), Continued

Step Description

The Card Settings screen appears.

The Card Setting fields are explained in the table below:

Field/ Button Description

Select Card

Number

dropdown box

The MegaRAC G3 Remote Recovery Application (RRA) automatically assigns a

card number to the MegaRAC G3 card that it locates in Recovery Mode. This is

helpful when you are trying to flash more than one MegaRAC G3 card. Think of

the Select Card Number dropdown box as a shortcut to other MegaRAC G3 cards

that are in Recovery Mode.

MAC Address This field allows you to specify the MegaRAC G3 card’s MAC Address.

Note: New settings are stored in the Windows registry automatically.

Note: When you specify the

MegaRAC G3 card, it is advisable to set the

MAC address back to the one indicated on the sticker physically located

on the back of the

MegaRAC G3 card’s PCB.

IP Address This field allows you to specify your MegaRAC G3 card’s IP address. The IP

address you assign is only valid during Recovery Mode.

Netmask This field allows you to specify your MegaRAC G3 card’s network mask. The

network mask you assign is only valid during Recovery Mode.

Gateway This field allows you to specify your MegaRAC G3 card’s gateway or router

address. The gateway address you assign is only valid during Recovery Mode.

Cancel Button The Cancel button allows you to cancel any new settings that are not saved.

OK Button The Ok button allows you to save any new settings that you have made and

continue with the flashing function.

Cont’d