User`s guide

Chapter Two : Installing Your MegaRAC G3 Card
7
Step 2 Install the Optional Battery and Battery Clip
The MegaRAC G3 on-board battery backup is an optional component. When the
optional battery is installed, your MegaRAC G3 card can stay powered on for 30 minutes
without any external power from the host system or AC adapter.
BBU (Battery Backup Unit) Installation
J2 Battery Connector
To install the Battery Backup Unit, plug the battery cable into the J2 Battery connector
and place the battery pack in between the three mounting holes. Next, align and snap the
plastic battery clip into the three mounting holes over the battery pack. See the following
diagram.
Cont’d