User`s guide

Chapter Two : Installing Your MegaRAC G3 Card
29
Step 10 Connect to the MegaRAC G3 from a Client System, Continued
Step Description
3
Type in your Network Name. In this example, Your Network Name is the Network Name. Next, you
must enter a range of IP addresses that you want to search. In this example, the MegaRAC G3 card’s IP
address is between 192.168.0.0 to 192.168.1.0. Left click the Add>> button when finished.
4 The name and IP range of the MegaRAC G3 will display in the right field. Place a check in the box next
to the range of IP addresses. Left click on the Next button.
Cont’d