User`s guide

Chapter Two : Installing Your MegaRAC G3 Card
31
Step 10 Connect to the MegaRAC G3 from a Client System, Continued
Step Description
7 In this example, the MegaRAC G3 card’s IP address is 192.168.0.36. Double left click on the IP address
to start managing the MegaRAC G3 card and write down its IP address. Left click on the Finish button
after RacTrendsSeek Locator discovers all MegaRAC cards.
When prompted for the user name and password, enter the following:
Field Default
User Name
root
Password
superuser
8
Left click the OK button. After you successfully log into your MegaRAC G3 card, you are greeted with
the Welcome to MegaRAC G3 screen.
Note: The default user name and password are in lower-case characters.
Note: When you log in using the root user name and password, you have full administrative
powers. It is advised that once you log in, you change the root password. See the
Administrator Setup subsection under the MegaRAC G3
Configurations section of this chapter.