User`s guide

MegaRAC G3 User’s Guide
42
IP Address Range, Continued
Note: The Start and End IP addresses can be the same if you only wish to scan for one
MegaRAC G3 card with that specific IP address.
When you have finished entering all the IP address ranges to be scanned, make sure that
they appear correctly in the list box. Confirm that the checkbox next to the IP range you
want to search is checked.
At this point, you have two options. You can choose to run the scan immediately by left
clicking on the Next button, or you can select to schedule the discovery to run at specific
times and intervals: daily, weekly, monthly or never.
The name and IP range of the MegaRAC G3 card will display in the Selected IP Range
window. Left click on the Next button.
Cont’d