User`s guide

Chapter Three : Locating Your MegaRAC G3 Card
43
IP Address Range, Continued
If the IP range is correct, RacTrendsSeek Locator locates all MegaRAC cards. It lists all
MegaRAC G3 cards it has discovered. Left click on the Finish button after
RacTrendsSeek Locator discovers all MegaRAC G3 cards.
Schedule Discovery
To schedule a scan, left click on the Set button in the Schedule Discovery box.
Select scanning frequency desired and start time and date. Left click on the OK button.
Make sure that the IP address ranges to be scanned are checked. Left click the Cancel
button to close that page. Left click on the Finish button to close the Installation Wizard.
Schedule Discover will start at the scheduled time on those specified IP addresses ranges.