User`s guide

Chapter Four : Using Your MegaRAC G3

Upgrade Firmware, Continued

Updating Your MegaRAC G3’s Firmware, Continued

Step Description

7 Once it verifies the image, the following dialog box appears:

Left click the OK button.

8 If the dialog box prompted that an update is necessary, left click the Flash button. If the wizard

determined that no flash is necessary, you can left click the Cancel button.

Note: Even if you choose to cancel the firmware flash operation, the MegaRAC G3 must be reset.

This means that you must close the Internet browser and log back onto the MegaRAC G3

before you can perform any other types of operations.

Note: You can place a check next to Preserve Config if you want to flash the firmware but retain your

original configuration.

9 Left click the OK button.

Cont’d