User`s guide

Chapter Four : Using Your MegaRAC G3
87
Configure Group
You can left click on the Configure menu item from the menu bar. The following table
gives you a brief description of each menu item. Each menu item is explained in more
detail further in this section.
Function Description
Users This menu item allows you to administer users that can access the MegaRAC
G3 and host system.
Network This menu item allows you to configure the network parameters of the
MegaRAC G3.
Firewall This menu item allows you to allow and restrict the IP addresses that can
access the MegaRAC G3.
Alert
Notification
This menu item allows you to configure how alerts are sent.
Date & Time This menu item allows you to configure the time on the MegaRAC G3 card.
Serial Port This menu item allows you to configure Serial Over LAN access on your
MegaRAC G3 card.
SSL Certificate This menu item allows you to upload a Digital Certificate and Private Key to
the MegaRAC G3 card.
PMCP File
Upload
This menu item allows you to upload a platform management file for your
motherboard/ server board.
IPMI
Configuration
This menu item allows you to configure the MegaRAC G3 card to read data
from an onboard baseboard management controller (BMC) on the
motherboard/ server board.
Server OS
Monitoring &
Recovery
This menu item allows you to configure operating system monitoring and
recovery methods.