Technical information

MegaRAID Configuration Software Guide
70
Using Easy Configuration,
Continued
Step Action
4 Press <Enter> when you are finished creating the current array. The logical drive
configuration screen appears.
The window at the top of the screen shows the logical drive that is currently being
configured as well as any existing logical drives. The column headings are:
LD The logical drive number
RAID The RAID level
Size The logical drive size
#Stripes The number of stripes (physical drives) in the associated physical
array
StrpSz The stripe size
Drive-State The state of the logical drive
5 Set the RAID level for the logical drive. Highlight RAID and press <Enter>. The
available RAID levels for the current logical drive are displayed. Select a RAID level and
press <Enter> to confirm. See the MegaRAID Hardware Guide for your board for an
explanation of the RAID levels.
Cont’d