Installation Instructions

L-C2-360

REV 3 - 1812041115

CARE & CLEANING

By following these recommendations, you will enjoy the beauty

and convenience of your unit for many years to come.

STAINLESS STEEL

As needed, use a grill cleaner (or a soapy water solution) and

a clean cloth to remove grease and dirt from the outside of the

unit. For tough deposits, a copper pad can be used. Always

wipe with the grain. Rinse and dry completely. Then follow up

with a stainless steel cleaner and a clean cloth.

If this routine cleaning is not performed, the stainless steel

may become dull and develop surface rust (due to use and

atmospheric conditions). If left uncleaned, signiﬁ cant damage

and pitting may occur.

Important: DO NOT use steel wool, any other metal tools,

or any other cleaners/chemicals to clean the

exterior other than recommended above. Such

items promote rust.

When this unit is installed in a corrosive environment such

as near the ocean (salt air), poolside (chlorine and/or pool

chemicals) or any other location with exposure to high salt/

chloride content or corrosive chemicals/solutions, it will be

more susceptible to corrosion and MUST be maintained/

cleaned more frequently.

• DO NOT store any corrosive chemicals (chlorine,

hydrochloric acid, fertilizer, etc.) near your stainless steel

unit.

• DO NOT allow any corrosive materials (masonry dust,

debris, etc.) to settle on your stainless steel unit.

• These environments, chemicals, and materials may

cause the 304 stainless steel to develop surface rust and

consequently pitting. Under these conditions the unit MUST

be cleaned at least monthly. Inspect your unit often and

clean accordingly.

Fig. 4-1

Wipe with grain

Stainless

steel shown