Master Switch User Guide AP9210

MasterSwitch 100V – User Guide
20 20
Auto Power On
The Auto Power On selection allows the user to configure the receptacle to power-up and reboot
independently or with the master:
--- Auto Power On -----------------------------
1- With Master
2- 15 Sec After Master
3- 30 Sec After Master
4- 45 Sec After Master
5- 1 Min After Master
6- 2 Min After Master
7- 5 Min After Master
8- Never
<ENTER> Redisplay Menu
<ESC> Return To Previous Menu
Figure 7: Auto Power On Submenu
Select one of the settings. Selecting “With Master” indicates that user-selected settings for the master outlet
will also apply to this outlet. For more discussion of the master outlet, see below.
Master Outlet Configuration and Control
From the Outlets Manager submenu (see Figure 3), Option 9 allows the user to configure/control master
settings to apply to all outlets whose Auto Power On settings are set to “With Master.” To perform an action
on all outlets assigned to the master outlet, select Option 1 from the Outlets Manager submenu shown in
Figure 3. The following submenu appears:
---- Control of Master Outlet -----------------------------------------------
Outlet Device Name Auto Power On Reboot Duration
---------------------------------------------------------------------
1:ON Device 1 With Master Same as Master
2:ON Device 2 With Master Same as Master
3:ON Device 3 With Master Same as Master
4:ON Device 4 With Master Same as Master
5:ON Device 5 With Master Same as Master
6:ON Device 6 With Master Same as Master
7:ON Device 7 With Master Same as Master
8:ON Device 8 With Master Same as Master
Master PDU Immediate 5 Seconds
1- Immediate All On
2- Immediate All Off
3- Sequence All On
4- Immediate Reboot
5- Sequenced Reboot
?- Help
<ENTER> Redisplay Menu
<ESC> Return To Previous Menu
Figure 8: Master Control Menu