Master Switch User Guide AP9210

MasterSwitch 100V – User Guide

---- Passwords ---------------------------------------------------------------

1- Auto Logout : 3 Minutes

2- New User Name : apcuser

3- New Password :

4- Current Password :

5- Accept Changes :

?- Help

<ENTER> Redisplay Menu

<ESC> Return To Previous Menu

Figure 18: Password Submenu

Tools Submenu

---- Tools --------------------------------------------------------------------

1- Restart The MasterSwitch

2- Reset MasterSwitch To Defaults

?- Help

<ENTER> Redisplay Menu

<ESC> Return To Previous Menu

Figure 19: Tools Submenu

As shown in Figure 18, restarting the MasterSwitch processor board (without cycling power to outlets) is

available. The user may also reset the factory default configuration from this submenu.

Control Console Submenu

To change the baud rate of the serial port, select option 3 from the MasterSwitch submenu.

Note: Baud rate changes take effect the next time the user logs into the MasterSwitch.

--- Control Console ------------------------------------------------------------

1- Baud Rate : 19200

2- Accept Changes :

?- Help

<ENTER> Redisplay Menu

<ESC> Return To Previous Menu

Figure 20: Control Console Submenu